Put an extra drop of glue at the front and back of your fletchings. That is what I do and I have no problems with my WB ripping them off.
__________________
Deer coming into my treestand, a big non-typical. Setup is perfect. I draw back, take aim, and the pin settles perfectly on it's chest.....My thumb hits the release, arrow glides noiselessly toward it's target............then I woke up.....dang, another day of classes *sigh*
frigin thing has ripped my blazers off all but one arrow, and i got them refletched 2 both times at a different shop, any suggestions.
I've been shooting with a Biscuit for 6 years and NEVER had a vane come off an arrow. I shoot 4" vanes that I refletched myself, and have never had a problem. They can make some noise when drawing though, depending on the finish on the arrow.
__________________
'07 Hoyt Vectrix XL 50-60# / maxed at 63# 30"
HHA OL-5000 single pin
Wisker Biscuit
KWIKEE KWIVER / XX75-2314 arrows
S-Coil stabilizer / Loop & Kisser / Fletcher Peep
TRU FIRE / Hurricane Release
Muzzy 3 blade 100gr
Never had my fletchings get torn off using a fall away either...... Plus its dead quiet. Too each his own however..
__________________
2008 Bowtech Guardian 29'' 72#
Apex Pro Tune stabilizer
Ripcord fall away
Extreme Archery Bone Collector 1100 sight
Easton Axis ST Nano w Blazers
Natural Gear and Predator camo of course!
As mentioned previously, you need a drop of fletching cement at the front and rear of each fletch. Any competent shop should know this. Otherwise, you have some sort of tuning or clearance problem. Going to a drop away may solve your problem with the veins coming off, but there is still most likelysomething not right here with your setup.
__________________
A man has got to know his limitations . . . . .
Build your own deer missles man. Then you don't have to depend on some kid at a shop ruining your huntint time. It's easy. Get a decent jig, some blazer wraps, some good glue and go to town. They won't come off.
Shoot odd vane up with that rest, the bottom black bristles are tougher than the brown ones. You dont' want vanes hitting the black bristles.
Quote:
ORIGINAL: Mallardkiller
frigin thing has ripped my blazers off all but one arrow, and i got them refletched 2 both times at a different shop, any suggestions.
F@#$@n whisker biscuit
*sigh*
thats what im tryin to say...
