Germ, are you cleaning the base of the Blazer? If you are, don't. They have an activator on them to assist w/ adhesion. We use Bohning Quantum XT (pricey, but designed to work w/ the Blazer) on all aluminum arrows....They stick good. Also, make sure you clean the shaft w/ denatured alchohol first.
__________________
1995 Ford Ranger XL
Douglas Radial Tires
Super Blue headlights
Fiberglass front bumper
2400 pounds
LOL You didn't hear about the problem while all the koolaid was being passed around? Odd!
Don't you get the feeling sometimes that everybody else is deaf and blind? I don't know how many times I've had an issue with something and have heard "I've never heard of that before". Typically followed by some comment about how I've got a hidden agenda.
Just call me Mr.Lucky!
I used super glue. Didn't work on vanes, feathers were fine. Got rid of all but 2 of the fmj's I tried.
NO ONE ELSE HAS EVER COMPLAINED OF THIS, HMMMMMMMM. LOL
Are you using a wrap? Makes it easier to me. I use the Blazer wraps on my axis and acc arrows, and use Quantum xt glue. Hold up very well, and easy to strip apart with the wrap to refletch.
Quote:
ORIGINAL: Germ
What is the magic in getting blazers to stick to FMJ arrows?
LOL You didn't hear about the problem while all the koolaid was being passed around? Odd!
Don't you get the feeling sometimes that everybody else is deaf and blind? I don't know how many times I've had an issue with something and have heard "I've never heard of that before". Typically followed by some comment about how I've got a hidden agenda.
Just call me Mr.Lucky!
I used super glue. Didn't work on vanes, feathers were fine. Got rid of all but 2 of the fmj's I tried.
NO ONE ELSE HAS EVER COMPLAINED OF THIS, HMMMMMMMM. LOL
A lot simpler than all that. You're using the wrong glue. Send me a few, I'll fletch them for you and see if they come off.
I have mine wrapped and the guy at the shop said he found....pine ridge? glue to work the best for this. He also told me that blazers used to have some coating on the bottom but the new ones dont and they stick a lot better. Just what I heard.
__________________
Yes this is a Tikka, No you can't try it!!
Bowtech Guardian
HHA Optimizer w/4X
Trophy Taker
Easton FMJ's/CXL Selects
Slick Trick 100's
Carter Evo+/TruFire Bulldog & 3D Hunter
I use AAE fast set gel, Pine Ridge gel, Gold Tip glue and don't have any problems getting blazers to stick to any aluminum shaft. FMJ or otherwise.
FYI... there are only a few glue manufacturers located throughout the world. It is very very very likely that all of the fast setting fletching glues are exactly the same glue coming from exactly the same place, regardless of what label is on the outside.
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
What the, Blazers and FMJ
You didn't hear about the problem while all the koolaid was being passed around? Odd! 
