Someone with Archery Software?

jbowersox · 07-19-2008, 02:52 PM

I'm trying to build some 28" arrows with Beman ICS Hunter shafts. I want to use 100 gr brass inserts with 100 gr tips. I believe I need to get 340's but I just want to be sure that I shouldn't get 300's because of the added weight up front. Any help you could offer would be much appreciated.

TexasBowHunter · 07-19-2008, 03:01 PM

Send MECHDOC a PM, I recently went through the same thing and that guy is killer with his program....

MECHDOC · 07-19-2008, 03:45 PM

Let me know if the numbers dont look right to you.

jbowersox · 07-19-2008, 04:31 PM

Mechdoc, correct me if I'm wrong, but does that first scenario call for a 28.5 inch shaft to spine correctly? Also in the Insert box is that where you calculated for the 100 gr brass insert? Thanks for the help. I appreciate it.

Kanga · 07-19-2008, 04:41 PM

Archers Advantage came up with the Beman ICS Hunter 34028" 100gr insert, 100gr head, 3 blazers and super nock.

Optium spine, est weight 490gr, FOC 17.8% with a est. speed of 266fps

MECHDOC · 07-19-2008, 07:18 PM

Sorry JB I did use 28.5.I have added 25gn to tip to give you the correct insert weight.

jbowersox · 07-19-2008, 07:35 PM

Thanks MECHDOC. Looks good to me.

jbowersox · 07-19-2008, 07:37 PM

Quote:

ORIGINAL: Kanga

Archers Advantage came up with the Beman ICS Hunter 340Â*28" 100gr insert, 100gr head, 3 blazers and super nock.

Optium spine, est weight 490gr, FOC 17.8% with a est. speed of 266fps

Thanks Kanga. Both programs seem to be the same. I wish I could get 266fps with that arrow out of my bow though. I've got some arrows roughly that weight that I'm getting 252fps out of right now.

peakrut · 07-19-2008, 11:22 PM

Did you buy the $9.95 one?