RE: removing arrow stickers?
I used Goo Gone Extreme. It's cheap and works quickly. Some people may advise against this because it may cause the carbon fiber to split/fray. Try it on one and if there is no problem, go for it. Just but it on a rag and rub for a few seconds. It's gone! To back this up, I took some pictures of my arrows, which are not frayed at all. They were Carbon Express Maxima 350 3D selects, which have a similar red logo. The Goo Gone Extreme did the trick. The only problem I had with the stuff was the smell, so I recommend that you do it outside. There will be no sticky residue. It may temporarily discolor them (slightly lighter), but that goes away after a month or so. You will notice that my arrows are completely black. Just don't miss. You will never find these until you get the lawn mower out. Haha!
__________________
[center]2008 Bowtech 82nd Airborne; 29"DL, 73#DW (Obsession)
Vapor Trail Limb Driver (Black)
HHA Optimizer-Lite Ultra DS-XL5519 4x
Octane 7" Stabilizer (Obsession)
Octane 1 Piece Quiver (Obsession)
Vapor Trail VTX (Lime and Black)
335 FPS
|