Am i overspined or am i ok?

[MOhunter46]

My seput is a101st at 60lbs and a 29"dl with a 100 grain tip. I got some 340's easton epics the other day so am i overspined? I think the chart says 400's but i guess i looked at itwrong. They seem to be shooting ok tho. So thanks for any help.

[Kanga]

Whats the arrow lenght, fletch and nock?

[MeanV2]

I'd say you could shoot the 400's, but if the 340's are shooting fine and you have them. Just Git-R-Done!!

Dan

[MOhunter46]

ORIGINAL: Ausie-guy

Whats the arrow lenght, fletch and nock?

They are 29 1/2"

[Kanga]

AA does not list the 101 so I used the 82nd.

Ran your numbers and it say's you are slightly weak.

I will pm the snap shot of the chart it is too big to upload here.

[MeanV2]

ORIGINAL: MOhunter46

They are 29 1/2"

That's longer than I expected! I shoot a 27" arrow with a 28" draw.

Dan

[Roskoe]

I would suspect you are overspined with the 340's. Try a bare shaft - see ifit hits the target angle left.

Well, only one way to tell. Knock off those vanes off one or two. Go out at 30 yards, and shoot the bare and the fleteched, and see where they hit.

[MOhunter46]

ORIGINAL: MeanV2

That's longer than I expected! I shoot a 27" arrow with a 28" draw.

Dan

Thats what the guy at the bow shop recommended so thats what i got.

[Kanga]

Sent you another PM

You can cut the shaft from the back but you will have to re-fletch them.