How in the world do you change a worn out nock receiver on a Bitzenberger jig!!!<img src=icon_smile_cool.gif border=0 align=middle><img src=icon_smile_cool.gif border=0 align=middle>...thanks...
Back out on all 3 allen head screws that select fletch type just above nock receiver to releive spring tension. Then look on the lower right side of the frame below the nock receiver and you should find a small screw. Remove this screw and the nock receiver should come right out. Reverse this procedure to reinstall the new receiver.
__________________
"It's not what you take when you leave this world behind you, but what you leave behind you when you go"
Fletching Jig!
