cable guide noise?

[crutch]

When I draw and shoot bow the cable guide makes noise while sliding on shaft, like it's dry. Besides going with a teflon slide is there anything you can do to quite it down? Didn't know if there is something to clean it with or rub/spray on it to help.
Thanks

[KodiakArcher]

Try a little string wax.

[jeremy3303]

String wax should work. If it doesn't, you could try a little powdered graphite lubricant.

[BGfisher]

Best thing you can do is clean the rod and the inside of the slide with alcohol. Then DON'T put any lube on it. Keep it clean.

[mystryak]

I would recommend spending the 8 bucks or so and just going with the tephlon. I had the plastic one on my diamond pretty much just break in 2. I put a tephlon on and so far no problems if not smoother.

[Dr Andy]

I use a little mineral oil after cleaning it! Veg oil works ok too, just rub it in really good with a tissue and don't leave any oil on it

[blackfish]

I had ware on my shaft and it was hanging up I turned it around end for end and it was fine.When it was hanging up it threw my shot off it was hardly noticable and it was driving me crazy till i figured it out.So I guess I just figured if you run into that problem you will nowhy

[TFOX]

I have used this along with a cable slide even though the add saysit can be used without it.I do not reccomend that.
http://www.lancasterarchery.com/shop/product_info.php?products_id=2302&osCsid=3d1be 3175bdf3a4cae6b137edb240f49

I would still reccomend going with a new teflon slide.