i am getting ready to rebuild my buddies miranda ( 2005 )
i am putting 60 lb limbs , new string and new module on.
my question is .
when you go from 23" module to a 25" module to lengthen the draw length
what number should be on the new module for 25" draw.
i am getting ready to rebuild my buddies miranda ( 2005 )
i am putting 60 lb limbs , new string and new module on.
my question is .
when you go from 23" module to a 25" module to lengthen the draw length
what number should be on the new module for 25" draw.
The Miranda takes an S#4 module or 25" draw and the draw stop should be set at approx. the 5.8 mark. To properly set the draw stop, you start counting from the bottom (L) end of the cam to the middle of the draw stop post screw head. The long lines represent the whole numbers and the short lines represent the half numbers.
2005 maranda ( rebuild )
