I was wondering what you guys do as far as aligning broadheads w/ fletchings. I've found if my bow is tuned properly doesn't really matter. My buddy swears you must align. What side of the fence are you guys on. Oh by the waywe bothshoot fixed blade heads
__________________
2009 Bowtech Admiral
50 Cal Traditions XLT EXTREME camo/nickel
50 cal Omega ,thumbhole stock ,fluted stainless
Browning Citori "sporter" ULTRA 12 ga
Marlin 22 mag
Mossberg 12 ga Trophy Slugster /bushnell scope
Remington scoremaster 22, What gramps taught me to shoot with!! Sure do miss ya buddy
If you think of nascar and the draft....a car benefits when in the draft regardless of the distance back from the lead car (within reason). All cars are the same shape.
Now apply this to an arrow. The blades on a three blade broadhead are acting like the lead car. But....the draft created could only be utilizedtoit's maximumif the vanes were the same height and in the same position as the broadhead blades.
So, with helical....how would you align to utilize the draft? You can't.
So, with offset....how would you align to utilize the draft? You would have to use a broadhead with offset blades. (how many BH's have offset blades?)
So, how many people (to gain maximum benefit from the draft) use straight fletch?IMO, straight fletchis pretty useless for stabilizing a broadhead.
__________________
2006 Mathews SBXT, 29", 70lbs
G5 Optix LE w/ Fitz Fibers
Trophy Taker Shakey Hunter
Scott Lil Goose
GT Pro Hunter 7595 - BLAZED
Slick Trick Magnum 125's
Vapor Trail Strings and Cables
I've also been told not get a bow that shoots over 280 FPS with broad heads, because they will drift.
I am shooting 315 FPS with my BH. I cannot shoot the same dot on my Morrell Yellow jacket at 40 yards or I will shave off my vanes or damage my arrows. If they fly that consistent, I'mhappy.
Lots of myth concerning this , No I dont do what you describe , and could see it being very dificult for those shooting carbons to do , besides being useless .
The only time I consider blade orintation is when shooting a 2 blade head . I find that most shoot better when the blades are level with the shelf of the risor , the edge of the blade giving less wind resistance to the poor horizontal nock travel most of the bows produced nowadays have , with the cabelrod toqure built in .
__________________
Wear a full harness and tie yourself to your tree !
Take a kid hunting or fishing .
Nocks , the most overlooked component .