Do any of you guys have trouble getting good fletching contact while fletching blazers on small diameter arrows with a helical? When I do the fatter arrows everything lays down fine.
__________________
"From the outside looking in you can't understand it, from the inside looking out you can't explain it."
I did have some troubles when I switched from GT hunters to Easton Epic ST's which are a bit slimmer. Took me a second to adjust my jig just right but now I'm getting good contact again.
__________________
2008 HNI Bow Contest Team #35 Top Pin Predators
I fletch Blazers on Beman MFX 400's. I had to do some adjusting but after a couple dry runs w/ no glue on the vane I got it pretty good.
One tip that may help....I don't put the base of the vane up tight in the clamp. I let the vane sit about 1/16" from the jig jaws so it will give a little and bend around the shaft when you put pressure on it.
Blazers with small diameter arrows
