Bitz user's manual

davepjr71 · 05-11-2007, 01:58 PM

Could any of you please supply me with a copy of the Bitzenburger user's manual if you have a copy to email? I just purchased a used one with no literature and I'm trying to figure this thing out.

Where should the arrow be resting on the front when I set the jig? etc.

Thanks.

davepjr71 · 05-11-2007, 04:07 PM

I think I have it figured out guys. Here's my first 2 arrows with onestringer wraps and offset. The only question I have now is how do you figure out how much offset you actually have?

davepjr71 · 05-12-2007, 04:47 PM

Nobody out there with a Bitz can provide info? I contacted Bitz and they do not have a single PC on site and have to FAX me the info.

bow_hunter44 · 05-12-2007, 07:49 PM

Quote:

ORIGINAL: davepjr71

Nobody out there with a Bitz can provide info? I contacted Bitz and they do not have a single PC on site and have to FAX me the info.

They don't havea single PC on site??!! Good lord Bitz folks, live in the now!! Besides that, I'm interested in seeing you get an operators manual for the Bitz. I would like to get my hands on one as well!

davepjr71 · 05-12-2007, 08:26 PM

I thought the guy was actually kidding with me when he said it. So, I said, "You're kidding right?" He said no he wasn't. I really do not know how a company can function today withouta PC for record keeping. Whoever does theier paperwork is one busy person. And imagine their filing system.

Monday I'll scan it when I get to work (If they actuallyfaxed it to me Friday)and send you a copy if you'd like bow_hunter44? The email function here will not allow you to send files.So, I'll need your email address if you want to PM it to me.

Len in Maryland · 05-12-2007, 08:28 PM

I'm sure I have copies in the shop. If you want to stop by, I'll give you an original.

davepjr71 · 05-12-2007, 08:48 PM

Thanks Len. If the copy they faxedme isn't legible I'll stop in.

05-12-2007, 09:32 PM

Even if you get the manual, it really doesn't help much. The marks on a bitz really don't help me much.

I have a copy but no scanner.

To get a good helical, you really need to just play around.

davepjr71 · 05-12-2007, 10:19 PM

That's the general idea I've got from doing a few arrows. Doesn't hurt to have literature though. I'm trying to figure out how people say they have a certain degree of offset.

The arrows I've done spin more and fly well with an agressive offset and a closer to straight offset.

hallj86 · 05-13-2007, 10:27 AM

Measure the movement off of the center mark on hte top and the bottom.