Where is JeffB?

walks with a gimp · 12-14-2002, 08:23 PM

Haven't seen any posts from him lately! Come out come out where ever you are. Oh, will the new '03 1/2 inch Infinity cam modules fit on the '02 cams? I just checked my Pat's draw length with the 29 inch module and without the grip it measures 29 3/8 inches AMO. I need another 1/2 inch for summer shooting. Anyone know? Russ.

BowTech_Shooter · 12-15-2002, 10:48 AM

I can't answer for where JeffB is but I miss his smiling face on the boards... Always good for a laugh and I enjoy his technical knowledge of bow and arrow mechanics...

The 2002 and 2003 cams are different. The mods from the 2001-2002 Infinity cam won't work on the 2003 cam. They will be marked with an I before the module number i.e. I 1, I 1.5, I 2, I 2.5 etc., etc. through module number I 6.

I hope that answers part of your questions...<img src=icon_smile_wink.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle>

Kanga · 12-15-2002, 01:02 PM

Me thinks Pat sent Jeff the "PROTOTYPE" and Jeff is busy putting "IT" through its paces and will be putting up an extensive report <img src=icon_smile_tongue.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle>

Aussie by birth Texan by choice

JOE PA · 12-15-2002, 08:33 PM

I don't think we've heard a peep out of Jeff since the big spat with Pinwheel 12 over the Bowtech posts. It's a shame, since I learned a lot from each of them. I also hope he starts posting again soon.<img src=icon_smile_approve.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle><img src=icon_smile_big.gif border=0 align=middle>

Avoid the inevitable until it is absolutely unavoidable!

walks with a gimp · 12-15-2002, 08:58 PM

Well, IMO we can't afford to lose ANY experienced archery enthusiast on this site. We can all learn something from anyone that contributes to the sport. Lets get him back!!!

Winger · 12-15-2002, 09:21 PM

So Bowtech Shooter,

You are saying I can't get a 28.5 inch 2003 module to use on my 2002 Infinity cam? Dang ....

walks with a gimp · 12-15-2002, 10:43 PM

I was hoping for the same thing but I guess I'll just tie on a loop for the summer. Thanks BowTech_shooter<img src=icon_smile_big.gif border=0 align=middle>

BowTech_Shooter · 12-16-2002, 05:22 AM

I probably shouldn't say this before I know for sure but I'm gonna say you can probably upgrade the bow with a 2003 cam. Just so you know though, BowTech doesn't sell cams outright.
If the 2003 cam will work (and I don't see why they wouldn't) the owner would have to pay XXXX dollars for the new cam and return their old cam in an exchange.
They will only make these transactions through Authorized BowTech Dealers.

I'm guessing the string and cable lengths would be the same for each cam...

Winger · 12-16-2002, 05:32 AM

I guess we still don't know where JeffB is ....<img src=icon_smile_sad.gif border=0 align=middle>

But since this has turned into a BT thread <img src=icon_smile_big.gif border=0 align=middle> ..... Bowtech Shooter, can you tell me what the differences are between the current Infinity and the 2003? What did they change?

Just curious.

Winger

PABowhntr · 12-16-2002, 06:52 AM

Jeff still regularly visits the forums though he doesn't quite post as much. I do know that both work and family concerns are taking up quite a bit of his time right now.

I, too, am looking forward to seeing some of Bowtech's 2003 lineup.