Quick spin & whisker biscuit

PaBowhunter29 · 03-13-2007, 04:03 PM

do Quick spin and whisker biscuit do they work? a pro shop asked me if i was crazy because i sayed him if you can shoot QS and WB

Madjac20 · 03-13-2007, 04:56 PM

Quote:

ORIGINAL: PaBowhunter29

do Quick spin and whisker biscuit do they work? a pro shop asked me if i was crazy because i sayed him if you can shoot QS and WB

Don't know about Quick spins, but blazers areyour best bet out of the Whisker Biscuit.

Rockby · 03-13-2007, 06:13 PM

I have to agree with Madjac20. I have used both with my whisker biscuit and seem to have less problems with blazers.

hallj86 · 03-13-2007, 06:53 PM

Think of it as this when you put quick spins on you need a helical or off set. When you have the vane turned on the shaft and you look down it and see the profile you can see more surface ie. more to pass through the WB and will slow your arrow down. The arrow vanes will not have enough time or be stiff enough to spin a path through the WB. It might cause you a little instability in the early light along with the los of fps., but the vanes will correct that quickley.

passthru79 · 03-13-2007, 07:12 PM

Quick spins dont have to have very much offset at all and shouldnt use helical on them. The biggest problem with quick spins is that they are allot softer material and less stiff than blazers or predetor vanes. Im not sure about the new wisker bisquites but the old ones would tear the quick spins up after just a few shots, make them all wavey and almost melted looking.

CAJUNBOWHNTR · 03-14-2007, 10:54 AM

Quick spins and whisker bisquit, not!

CB

Shootem up870 · 03-14-2007, 11:30 AM

yup as stated blazers are the best through the biscuit. if you shoot a drop away the quikspins are better IMO