REflex bow
hey guys just got my bow was wondering if any of u know how many turns out the limbs go?? its a reflex excursion. Also how to change the draw length.
|
RE: REflex bow
hey guys got the how many turns out now i just need to know how to adjust the draw length. Do i need a bow press or just looosen those screws on the cam and adjust it back and forth.
|
RE: REflex bow
You need to move the module...remove the small allen screw that secures it and move both ends to the same hole....they are labeled....A, B, C, D I believe....I also believe they are adjustable in 1 inch increment, not 1/2 like the Hoyt's are.
|
RE: REflex bow
Yeah just got my highlander and had to change the draw lenght as well. Just loosen those screws and move it to your draw length should say 27-30 or what ever yours is. If you have your manual for the bow it will tell u in there too. Good luck.
|
RE: REflex bow
On my Buckskin the limb ends went over top of the adjustment screws on the cams. Was a pain but I had to rotate the cams slightly to get to the screws. Not sure if you'll have this problem.
|
RE: REflex bow
ORIGINAL: lrhuntr Yeah just got my highlander and had to change the draw lenght as well. Just loosen those screws and move it to your draw length should say 27-30 or what ever yours is. If you have your manual for the bow it will tell u in there too. Good luck. Butch A. |
All times are GMT -8. The time now is 02:32 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.