Flecthing contact , move rest or teak cable gaurd???

[paka]

Aloha Everyone,
Was hopping to get some ideas for my set up. Im shooting 2 inch blazers and see there rubbing my cable and getting a left tail kick on my arrow in target. Black marks on my bottom right fletching .
So , I twisted the cable gaurd out a little , not enough to tweak cam , but the fletching still rubs a little [:@]
Should I move my bisquit out to the left and site back in , or start a series of tunning ?? Please help , Im kind of lost hear .
Bein hunting pigs lately and to kill these buggers the shot has to be on the $$$ , if not good luck.
Thanks for any idea's

[stikbow26]

Paka,Not knowing what arrows you are shooting if you have the ones that you can turn your nocks with which most are now adays just try turning them first.. Walt

[paka]

Thanks Walt
Last night I put some lipstick on the fletching and noticed it wasnt rubbing the cables but it was hitting the lower right side of the whisker bisquit. Leveled bisquit and wha la no contact.
And one day I will upgrade to rotating nocks , ohh yes , one day I will

[YooperMike]

I had a little trouble with my Old Glory and Blazers. There is very little clearance with teh cables on my OG, but I just played around with the position of my vanes so that I get clearance and also I screwed around with the rest so it is all good. It may take a while, but have patience, you will be able to get the clearance you need without tweaking the cables.

[paka]

YooperMike,
Next set of arrows I'll rotate nocks alittle and that should helpsolve that problem
Thanks for reply