'03 bowtech extreme let off

jesshodgie · 07-03-2006, 03:39 PM

i recently gotthis bow, and i also have an archery research 34. my ar is so much more easier to shoot. im not sure, but i believe theextreme is set at 65% let off, how canfind out? my father-in-law lost the modules.and is the draw legth adj without changing modules?

bigcountry25 · 07-03-2006, 08:23 PM

The easiest way to check the let-off is to put the bow on a poundage scale and see what your peak draw weight is and what your holding wieght is and get a calcutator if you need one and figure the let-off. You can go to www.bowtecharchery.com and click on catalogs and manuals and they have the 2003 manual listed. You have to change mods to change the draw length in inch incraments but you can adjust the draw length some with the draw stop peg but if you shorten it then you have less let-off and valley and just the opposite of you make it longer. Hope this helps.

jesshodgie · 07-04-2006, 07:10 AM

i'll check with bowtech. i dont have a scale. actually, the complaint i have about the bow, is the very small let off valley.i do appreciate your help. thanx.

TerryM · 07-04-2006, 07:37 AM

Not sure about your bow but I had an 04 Patriot with Infinity cam and it sounds like your draw stop is set for 65% letoff which will also give you less valley. Slide the post towards the "L" and see how that feels. I think thats your problem.

jesshodgie · 07-04-2006, 07:45 AM

thanx guys, your right terrym. after moving the post according to the website, it feels much better. i may just have a new go-to bow now!! superb!!!

TerryM · 07-04-2006, 01:03 PM

AAHHH, another archer coming over to the right side. You can always trade in the AR for some arrows