Changing letoff on bowtech

Just got a used bowtech liberty. It sure don't feel like no 80% letoff. I was wondering if anyone knows how to adjust or see if it is 80%. Would adjusting changed the tune?

[Paul L Mohr]

What kind of cam does it have? Most of the single cams adjust by using a different module and draw stop setting. Your shop should have chart, or you might find one online. I think my manual for my mighty might has one in it.

You can adjust a slight valley into them as well.

You could also just shorten the draw stop a little I think and it will have less let off. Might be the other way around though, I would have to look.

We have some pretty serious bowtech guys there though, I am sure someone will give you a more precise answer if you wait long enough. Or just call bowtech.

Paul

[bigbulls]

Here ya go. Page 4.

http://www.bowtecharchery.com/downloads/2004OwnersManual.pdf

Thanks Bigbulls, after looking at your attachment, its setup correctly for 80% letoff, but its more liek 60%. I tried playing withthat draw stop and it didn't make any difference.

[BowTech_Shooter]

ORIGINAL: bigcountry

Just got a used bowtech liberty. It sure don't feel like no 80% letoff. I was wondering if anyone knows how to adjust or see if it is 80%. Would adjusting changed the tune?

What number module do you have on the cam?

Got a F1.5 for 29.5" draw length

[Len in Maryland]

Since it'sa 'used' bow, someone may have installed the wrong length string or cable. If you want to confirm all the settings,my shop is very knowledgeable on BowTech bows.

I will be by your shop this week if my stiffer arrows come in. Maybe take a look.

[walks with a gimp]

Have you checked the peak weight and the holding weight of the bow?