Quiver for Parker with zero effect

DoninVa · 10-05-2002, 06:18 PM

I have a Parker feather mag II with the Muzzy zero effect rest. I have read on here that it is hard to get a quiver to work with this rest. I think the Parker 2 piece quiver would work (my boys junior mag has one). I don't like a quiver on my bow, but when using my climbing stand, it is hard to use my cat quiver. I would like to find one I could take off after I'm in my stand. Does anyone know what would work. I would be very greatful for any help. Thanks, Don

ijimmy · 10-05-2002, 07:35 PM

I dont think you will have any problems with a quickie quiver

If information provided by the members of this board have helped you please let us know .

Two Beards · 10-05-2002, 08:05 PM

I'd look into a Kwikee Kwiver, not sure if you'll need
the extra mounting bracket for spacing. I've got the 4
arrow combo quiver on my Q2, comes off/goes on in a few
seconds. I use the treestand mounting bracket, so I can
attach my quiver to the tree while hunting.

Len in Maryland · 10-05-2002, 08:07 PM

Most detachable quivers will probably require spacers to give you clearance of the main arm of the MZE.

DoninVa · 10-05-2002, 08:11 PM

Thanks alot guys, I was thinking about the quickie quiver. I will take my bow with me tomorrow and make sure the quickie will work. I had thought about the Alpine but I am almost sure it won't work. My brother-in-law has one and he likes it a lot but he shoots a Mathews with a trap door. Don

nub · 10-06-2002, 08:22 AM

I used spacers for my MQ1, but you might only have to remove 1 arrow to get you current one to work.

DoninVa · 10-06-2002, 08:32 AM

Can you buy the spacers or would I have to make a spacer.

Two Beards · 10-06-2002, 05:54 PM

Most bowshops that stock Kwikee Kwivers should also have
the accessory options, including the spacer you might
need. If not, you can order it from Cabela's or BPS.

KIDD642 · 10-07-2002, 12:28 PM

I use the cat quiver. I had trouble climbing with it on my back so I bought a seperate hoist rope ind use that instead of climbing with it. It seems like any two piece would work for you as long as the have stand-offs from the riser. Obviously anything that sits right against the riser will not work. Hope this helps.

Life Member:NAHC, UBP

Frank

DoninVa · 10-07-2002, 12:46 PM

Thanks alot guys, I bought a quickie quiver and the guy at the shop gave me some spacers. I moved my sight bracket back (it's a Cobra and has two sets of holes) and it has clearence without the spacers. I Am not going to shot with the quiver attached to the bow but I think I could as it clears the zero effect by 1/4". I like the quickie because of the arrow holder in the hood for my Rocket mechs. but it feels like it added a lot of weight to the bow. If I was going to shoot with a quiver on the bow, I think I would have gotten the Parker 2 piece that fits the bow. I really like my Cat quiver but I'm hunting with my 10 year old in ground blinds and we take the fold up dove chairs and when I go with my climber, the Cat quiver is hard to use. Don