shot the Blazer vanes
I was at the local shop last night and the guy talked me into trying the Blazer vanes on a few arrows. He re-fletched 3 of my carbon arrows with 2" Blazers that had standard 4" vanes on them. I also went with 4" inch wraps on the arrows. Since the Blazers are so much lighter, I could still add the 9 grains of the wrap and still be less than standard 4" vanes without a wrap. They look awesome and when I shot them this morning, I was very impressed. My groups were considerably smaller.
I would recommend these to anyone, my only reservation would be to check to see if you have clearance. The Blazers are a little taller than standard vanes. I use a drop away rest, so there is no problem on mine, but if you use a non-drop away rest, it may cause a proble? Maybe not.
I also have him making me a half dozen of the PSE Radial X-weave Predators (.003) with the 4" wraps and the 2" Blazer vanes. Can't wait to use those on the hogs in July!
Kev
__________________
Mathews Switchback 70#-29"
Cobra Sidewinder LX
Trophy Taker-Shakey Hunter
Radial X-Weave Predators
Bohning Blazer vanes
|