Tikka T3 Scope Mount
#21
Thanks for your reply !
I'm thinking about a 50mm objective.
Would you move to medium than ?
Keeping in mind with the Butlers covers on it.................
#22
No prob! Just checked & the BC flip up covers fit on my T3 w/ VX3 40mm no problem. Not sure if a 50mm will fit w/ the BC covers though.
#24
I used Tally LW lows. If I did not use these, my second choice would be Warne's factory replacement.
I really do not like the factory rings, but some folks seem to have used them without issue. I just don't want to chance my stuff failing at the top of a mountain, after I spent several hours getting into position for a shot at a good animal. YMMV.
I really do not like the factory rings, but some folks seem to have used them without issue. I just don't want to chance my stuff failing at the top of a mountain, after I spent several hours getting into position for a shot at a good animal. YMMV.
#26
#27
Well I tried installing the rings today. Looks like I must of lost a recoil pin thing on one of the rings. I never saw it until I tried taking apart the 2nd ring. So looks like I'll be buying another set and trying it again. I feel like a complete idiot but I guess a lesson learned.
http://www.midwayusa.com/product/159...g-mounts-tikka
#28
Spike
Join Date: Jan 2016
Location: Plovdiv
Posts: 88
My l used rings now to weaver base also made rings.
But at present they make a steel base which hase a double grip.
First introduced into the dovetail and further bolted to the receiver box and the words of the man who is doing would be piled and approximately 3 mm. lower.
Becoming what l hope will be soon upload pictures.
But at present they make a steel base which hase a double grip.
First introduced into the dovetail and further bolted to the receiver box and the words of the man who is doing would be piled and approximately 3 mm. lower.
Becoming what l hope will be soon upload pictures.
Last edited by spartan1; 03-02-2016 at 09:03 AM.