having problem chambering cartridge same reloads as i used last year but for some reason they are chamgering hard and not ejecting good some even get stuck have to stick cleaning rod down barrel to get empty out if any ideas on whats causing the problem and how to fix leave me a post open for any idea i'm getting real frustrated with the problem
This may sound stupid but try cleaning the chamber. I've seen (first hand) cleaning solvents/oil gum up and make it hard to impossible to chamber a round
__________________
The needs of the many out weigh the needs of the few or the one
Iagree with NE. try to attatch a cleaning brush from a 28 gauge or similar dia. gun to your electric drill and clean that chamber real good. Been there, done that.
270 wby mag
