Go Back  HuntingNet.com Forums > Firearms Forum > Reloading
Trajectory assistance >

Trajectory assistance

Reloading Share techniques for reloading, where to get the hottest in reloading equipment and learn how to reload from fellow hunters.

Trajectory assistance

Old 11-27-2015, 02:50 PM
  #1  
Nontypical Buck
Thread Starter
 
Join Date: Jun 2010
Location: VA.
Posts: 1,415
Default Trajectory assistance

For anyone having ballistics software, I'm wondering if you could run the flight path of a projectile w/these considerations:
Weight: 440 gr.
BC: .095
MV: 1,378 fps
Alt.: Sea level
Zero: 100 yds.
Temp.: 45 deg.
Could I possibly get stats for 150, 200, 250, and 300 yds. Flight path and drop, velocity at each range and possibly TOF for each range?
This is a lot to ask and any help would be greatly appreciated.
Game Stalker is offline  
Old 11-27-2015, 05:22 PM
  #2  
Nontypical Buck
 
Big Z's Avatar
 
Join Date: Sep 2009
Location: West NE
Posts: 1,455
Default

http://www.jbmballistics.com/cgi-bin..._drift-5.1.cgi

One option
Big Z is offline  
Old 11-27-2015, 05:39 PM
  #3  
Nontypical Buck
 
Nomercy448's Avatar
 
Join Date: Oct 2009
Location: Kansas
Posts: 3,898
Default

440grn pill w/ BC=.095 @ 1378fps MV w/100yrd zero, 45deg, 0ft Not much variability between these 3 sources, so I'd be prone to believe that they're close enough to go hang targets and test against.

Range....Velocity....Path....ToF

Handloads.com/calc (free, go do it yourself here just as easy):

0.......1378fps.........-1.5".....0.00sec
50.....1126fps.........2.68".....0.12sec
100.....986fps.............0".....0.27sec
150.....898fps......-11.61".....0.43sec
200.....830fps......-33.98".....0.60sec
250.....773fps......-68.93".....0.79sec
300.....723fps.....-118.34".....0.99sec

Hornady.com (also free, also just as easy):

0.......1378fps...........-1.5"
50......1132fps..........2.70"
100......990fps..............0"
150......900fps.......-11.50"
200......831fps.......-33.70"
250......772fps.......-68.50"
300......721fps.....-117.90"

From Litz's Shooter App:

0.........1378fps...........-1.5"........0.00sec
50.......1126fps...........2.70"........0.12sec
100.......980fps...............0"........0.27sec
150.......888fps........-11.70"........0.43sec
200.......818fps........-34.30"........0.60sec
250.......758fps........-70.10"........0.79sec
300.......706fps......-120.90".........0.99sec
Nomercy448 is offline  
Old 11-27-2015, 11:39 PM
  #4  
Nontypical Buck
Thread Starter
 
Join Date: Jun 2010
Location: VA.
Posts: 1,415
Default

Originally Posted by Big Z
.......[/url]

One option
Thanks, Big Z. Great option and very thorough.
Game Stalker is offline  
Old 11-27-2015, 11:44 PM
  #5  
Nontypical Buck
Thread Starter
 
Join Date: Jun 2010
Location: VA.
Posts: 1,415
Default

Originally Posted by Nomercy448
440grn pill w/ BC=.095 @ 1378fps MV w/100yrd zero, 45deg, 0ft Not much variability between these 3 sources, so I'd be prone to believe that they're close enough to go hang targets and test against.
Thanks for the heads up, NM. Very helpful and much appreciated.
Game Stalker is offline  
Old 11-28-2015, 12:15 AM
  #6  
Nontypical Buck
Thread Starter
 
Join Date: Jun 2010
Location: VA.
Posts: 1,415
Default

So, what partly brought this thread about?

http://www.oldammo.com/january12.htm .

This is a good read. Especially for those into cartridge history or slug users. The first slug I used was the BRI sabot out of an iron sighted smoothbore Mossberg 500 during the mid 80's. A rifled barrel came later. These still give the best performance for me so far of the slugs I've tested.
Game Stalker is offline  
Old 12-11-2015, 03:14 AM
  #7  
Spike
 
gemihur's Avatar
 
Join Date: Oct 2009
Location: Ridgelines of the Roanoke Valley, VA
Posts: 64
Default

Hornady offers a very user friendly webpage:
http://www.hornady.com/ballistics-re...ics-calculator
check out cheat sheet after calculation
I print 'em and stick it on my buttstock for quick field reference
Works great for anticipating POI of my wildcats, but haven't tried it for slugs yet, tho.
gemihur is offline  
Old 03-19-2016, 07:53 AM
  #8  
Spike
 
Hummer70's Avatar
 
Join Date: Mar 2016
Location: Aiken, South Carolina
Posts: 55
Default

FWIW when I transferred to Aberdeen Proving Ground, MD and got into the weapons and ammunition test business several things were learned about trajectory and programs.

Firing Tables are published for MGs etc and these are not calculated on computer programs because the BRL (Ballistics Research Lab) concluded down range performance duplicates computer projections 5% of the time. It was found that programs would be right on at say 300 and 700 yards and high or low at 200, 400, 500, 600, 800, 900, 1000 yards.

If anyone would like to know how we did it I will post it but it is a fairly long procedure I will be glad to share.

In the interim I will tell you how I do it with my personal hunting rifles.

You have probably noticed politicians are now using plastic signage to get their name/pictures out and after the election many of them do both to go around the state and pick up their signs.

I have been involved with local Republican Party here for many years and we are asked to go around and remove the signs and T posts they use to erect them. The material of choice is known as Coreplast and comes in 4X8 sheets. It used to sell for like 8.00 a sheet to the printers who screen print them for politicians.

I have a 600 yard range behind my place and when the party Chairman put out the word to take them down I was right on it quick. Another shooting friend and I would leave out in my F250 and cover the county and when I got home had a stack of 4X8 signs about a foot thick and T posts.

Some of them are only printed single side so I build frames 48" square, cut them in half and set them up at different yard lines 100, 200, 300, and 600 yards.http://" />

For hunting rifles I mount a 4X8 Coreplast on a 2x4 frame 4X8 and cover it with news print. You can go by your local newspaper and get end rolls off their presses for a couple bucks.

I have rifle zeroed for the range I want. For instance I zero at 300 yards normally for POA/POI (point of aim/ point of impact. I put a 50 yard pistol target at the top of the 4X8 target standing up and go back to 400 yards and fire 3 shots.

Then to 500 yards and shoot 3 and then to 600 yards and shoot three shots.

I then go down and measure the drops from the center of the target down to each of the 3 shot groups, record them and determine the average drops for each range.

Generally on 308 and 30.06 if you are zeroed at 300 you will be 12" low at 400 which you can estimate. For closer shots you shoot at 100 and 200 yards and record those. You will find your HOLD UNDERS at 100 will be about 5" and at 200 around 4".

I like the Burris Ballistic Plex Scopes and I zero the top cross hairs for 300, then I start moving back till I find where the next hash mark zeros mark the spot record that, then move back more till the next hash mark zeros and mark that and continue on till the bottom thick post zeros, mark that. I then go back with a 300' tape and record the ranges.

Now you can use the scope to give you a educated guess at the range. I take a piece of 6" PVC pipe cut 24" long and find the point where the lower points touch the bottom of the pipe and the top of the pipe and mark that and record that distance.

As your range increases the accuracy of range determination becomes more critical. Hope this helps you guys that have missed at the longer ranges.

Last edited by Hummer70; 03-19-2016 at 10:16 AM.
Hummer70 is offline  
Old 03-19-2016, 08:06 AM
  #9  
Nontypical Buck
 
Nomercy448's Avatar
 
Join Date: Oct 2009
Location: Kansas
Posts: 3,898
Default

Corrugated plastic signs work great for me too, except I source mine from Ag field signs. Guys pull them out in September before harvest and they just get tossed in the trash - so I used to drive around and pick them up for a lot of guys. Some of them have two piece stakes as well, a steel spike with an extruded plastic shank - these are great for making IDPA/IPSC targets (I have a couple cardboard templates and a big paper cutter to speed up shaping) - a guy can strike the edges, meaning strike the stake, and not worry about ricochets. Now I'm working for an Ag seed & chemical company, so I have access to the signage all year long, at no cost.
Nomercy448 is offline  
Old 03-19-2016, 08:42 AM
  #10  
Spike
 
Hummer70's Avatar
 
Join Date: Mar 2016
Location: Aiken, South Carolina
Posts: 55
Default

One mans trash is another man's treasure! ! !
Hummer70 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.