Community
Reloading Share techniques for reloading, where to get the hottest in reloading equipment and learn how to reload from fellow hunters.

270 load!!

Thread Tools
 
Old 11-11-2014, 09:30 AM
  #1  
Spike
Thread Starter
 
duckslayer82's Avatar
 
Join Date: Sep 2014
Location: Dublin,Ga
Posts: 70
Default 270 load!!

I have a ruger 270 that I'm gonna do some reloads for whitetail hunting and have read a good bit on powder and have had several people tell me to either use imr 4350 or h4831.I have also been stuck between sierra or speer 130 gr bullets. I'm a hunter not a bench shooter and I'm not to much worried about velocity numbers as much as performance on game so what wld you guys recommend for a load?
duckslayer82 is offline  
Old 11-11-2014, 10:13 AM
  #2  
Nontypical Buck
 
redgreen's Avatar
 
Join Date: Feb 2003
Location: Alberta Canada
Posts: 1,081
Default

150 grain Speer and W760. I like the ball powders.
redgreen is offline  
Old 11-11-2014, 01:13 PM
  #3  
Nontypical Buck
 
Join Date: Feb 2003
Location: Eastern wv
Posts: 3,647
Default

I always liked IMR 4831 with 130/140 gr bullets, IMR 4350 for the lighter ones, H4831 for the heavies in the 270.
RR
Ridge Runner is offline  
Old 11-13-2014, 03:22 PM
  #4  
Boone & Crockett
 
bronko22000's Avatar
 
Join Date: Jan 2004
Location: Eastern PA
Posts: 12,746
Default

My fav .270 Win load was 54 gr of IMR4350 pushing a 130 grain Nosler Ballistic Tip.
bronko22000 is offline  
Old 11-14-2014, 02:05 PM
  #5  
Typical Buck
 
Join Date: Nov 2005
Posts: 666
Default

My 270 likes Nosler 140 gr Ballistic tips or accubonds and a full case of H450, lucky I have several pounds of the discontinued H450.

Last edited by goatbrother; 11-14-2014 at 02:10 PM.
goatbrother is offline  
Old 11-15-2014, 05:49 AM
  #6  
Fork Horn
 
Join Date: Feb 2003
Location: SW Virginia
Posts: 353
Default

I have used 5x (I don't know the current lawyer max) grains of IMR 4350 with a 130 grain cup and core bullet for more than 50 years. I like Sierra, and Speer equally well, and Hornady just a tad better. I also experimented extensively with H 4831, which at that time was very inexpensive. At one point I corresponded with Jack O'conner asking how he managed to get 62 grains of 4831 in a case when for me, 60 grains filled it full. He said that he used WW cases and tapped the case while he was dumping the powder. Since, at the time, I shot a lot and this seemed too much of a hassle. I settled on 4350 which gave me similar velocity without filling the cases completely full.
keyshunter is offline  
Old 11-17-2014, 11:47 AM
  #7  
Typical Buck
 
Join Date: Nov 2005
Posts: 666
Default

You can also use a drop tube to cram more powder in a case.
goatbrother is offline  
Old 11-23-2014, 03:04 PM
  #8  
Fork Horn
 
ojibwa's Avatar
 
Join Date: Aug 2014
Location: GA
Posts: 357
Default

Jack o'conner favorite 270 load and one I have used many times..

60 grains of H-4831 and the 130 grain bullet of your choice.
ojibwa is offline  
Old 11-25-2014, 09:59 AM
  #9  
Nontypical Buck
 
Join Date: Feb 2009
Posts: 1,926
Default Well hunter...

there's at least a couple of powders and a couple of bullets for many calibers, that will harvest a deer.
Valentine is offline  
Old 11-25-2014, 11:16 AM
  #10  
Giant Nontypical
 
Join Date: Jan 2011
Location: Allegan, MI
Posts: 8,019
Default

Hornady SPs or BTSPs and IMR 4350 will get er done!
Topgun 3006 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.