Winchester M70 Coyote in .270 WSM

[bghunter338]

I have been trying 140gr bullets out of it and no luck. Does any body have one of these? And what seems to be working out of it? Thanks Michael.

[needs_recoil]

I have a browning x bolt not the winchester but my rifle loves 130 gr nosler ballistic tips over several different kinds of powder. I settled on 63.5 grains of imr 4350 and itll out shoot the shooter. 1/2 inch three shot groups at 100 opens to 3/4 in at 200. I believe Im at max in my gun so start lower and work up.

[bghunter338]

I tried again this morning with great success. I did some more research and came up with 140gr Nosler accu bond bullet and 61grs of 7828 IMR ssc powder. The out come was a 3 shot group in side of a dime at 100 yards. Next step is to go out to 200 yards and try it again. I will keep you posted. Michael.

[Ridge Runner]

if an accubond is shooting dime sized groups at 100, if it guets worse its shooter error. ask me how I know?
Back off to 400 and expect 2.5" groups if your doing your part.
RR

[bghunter338]

Just got back from shooting today at 200 yards and was able to keep the groups inside an 1in. Will go out to 300 next time.

[needs_recoil]

Just curious but what load did you settle on?

[bghunter338]

I settle on the 140gr Accu bond with 61grs of IMR 7828 SSC. It seems to be holding up pretty good.

[needs_recoil]

Im gonna have to give that load a try. I have some 140 accubonds and alot of 7828. May just be my new elk load if I get the same results as youre getting.

[bghunter338]

Keep me posted on that. I'm wondering how it would preform in another make off rifle.

[bghunter338]

Hi needs recoil,
How did that load work out in you gun? If you liked that one I've come up with another that is working just as well. I took 150gr Berger VLD with 62.9grs of IMR 7828. Getting 3076fps with this load.