logo
 

Go Back   HuntingNet.com Forums > Firearms Forum > Reloading

Reloading Share techniques for reloading, where to get the hottest in reloading equipment and learn how to reload from fellow hunters.

Reply
 
Thread Tools
Old 02-01-2010, 12:07 PM   #11
Fork Horn
 
Join Date: Jan 2008
Posts: 158
Default

I perfer the terminal performance of the 60%-70% weight retaining partitions and the new accubonds. They offer more termal performance than any 100% retaining bullet can by design.

And some of the new heavier for caliber bullets and the 32 cal and up do not peel back tight to the shank. I have expanded 225gr 358 bullets that have not lead left up front but are still .64 dia. They where recovered from a sand back stop which is brutal on any bullet. So .64 exiting an animal but leaving lots of extra lead that does more damage than any 100% copper can do un less it lets fragments some 30% as well. and no cooper fouling to boot.
TJEN is offline   Reply With Quote
Old 02-02-2010, 07:23 AM   #12
Fork Horn
 
Join Date: Mar 2003
Posts: 159
Default

I can only tell ya that I shot my first one back in the early 1970's and nothing has ever been fired out of my 7mm rem mag since.. every single animal I hit with one never lived long enough to worry about..most of them where hit directly in the shoulder with the bottom cross hair running right up and down the leg..not behind the shoulder and the vast majority were pass thru's, I never had a single bullet failure on an animal once..true they are not benchrest quality but your not benchrest shooting when you hunting..but still my old 7mm mag will shoot them all day long at an inch and quarter, no matter how many shots you... great bullet, great design, absolute devestation on chest cavities..you'd be hard pressed to find a better bullet made in any time period..it is a classic who's time looks like it will never come!!
Frank in the Laurel is offline   Reply With Quote
Old 02-02-2010, 02:41 PM   #13
Fork Horn
 
Join Date: Aug 2005
Posts: 124
Default

Quote:
Originally Posted by Frank in the Laurel View Post
I can only tell ya that I shot my first one back in the early 1970's and nothing has ever been fired out of my 7mm rem mag since.. every single animal I hit with one never lived long enough to worry about..most of them where hit directly in the shoulder with the bottom cross hair running right up and down the leg..not behind the shoulder and the vast majority were pass thru's, I never had a single bullet failure on an animal once..true they are not benchrest quality but your not benchrest shooting when you hunting..but still my old 7mm mag will shoot them all day long at an inch and quarter, no matter how many shots you... great bullet, great design, absolute devestation on chest cavities..you'd be hard pressed to find a better bullet made in any time period..it is a classic who's time looks like it will never come!!
Hey Frank, maybe you already know this, but I thought I would share this with you anyway. I shoot these exclusively, they are not POS, they shoot great and perform just like the high priced 1sts. Just gotta check back every now and then to catch them when they are available.

http://www.shootersproshop.com/index...62&t=Partition


.
steve4102 is offline   Reply With Quote
Old 02-02-2010, 03:32 PM   #14
Nontypical Buck
 
Join Date: Oct 2004
Posts: 1,085
Default

The Nosler Partition was once revolutionary in the world of cup and core bullets..

It is now a classic, but no less effective than it was when it was developed in the late 40s..

Truly, there are many more very effective bullets available nowadays.. I am a huge fan of Barnes X bullets... However, I consider these bullets just a greater variety of tools for the reloader.. I'm happy to have so many bullets to chose from..

I have a modest collection of bullets that I have recovered from dead critters over the years.. One of my favorites is a 160 grain 7mm ( from my .280) that killed a huge Alaskan bull moose on a float hunt in 1989.. Classic partition mushroom.. Still weighs 105 grains after penetrating appx. 2 feet of rompin', stompin', Alaskan bull moose.. Killing him was the EASY part......

Nosler partitions remain an excellent choice for any big game, as long as your rifle groups them well..
Pygmy is offline   Reply With Quote
Old 02-02-2010, 04:23 PM   #15
Nontypical Buck
 
BarnesX.308's Avatar
 
Join Date: Feb 2003
Location: Audubon & Red Rock, Penna.
Posts: 3,251
Default

Quote:
I perfer the terminal performance of the 60%-70% weight retaining partitions and the new accubonds. They offer more termal performance than any 100% retaining bullet can by design.
How so? If a bullet can expand to 200% diamter and retain all of their weight and exit, how is that not better? The bullet is tranfering energy depended on its speed, weight and frontal diameter. The Barnes X, for example, is dumping more energy all the way through the animal tha a bullet that sheds it weight and diameter half way through.
__________________
Scott Meier
White Oak Lodge
BarnesX.308 is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 

All times are GMT -8. The time now is 04:26 PM.