300 win mag
#11
Join Date: Jan 2005
Location: Somewere on Mt. St.Helens
Posts: 347
RE: 300 win mag
ORIGINAL: jkrajcovic
Is it possible to reload 300 win mag light enough to compare to a 30-06 or a 308 (a deer round) without going as light as the managed recoil rounds?
What kind of powder would you use and how much?
Is it possible to reload 300 win mag light enough to compare to a 30-06 or a 308 (a deer round) without going as light as the managed recoil rounds?
What kind of powder would you use and how much?
#12
Join Date: Jan 2005
Location: Somewere on Mt. St.Helens
Posts: 347
RE: 300 win mag
ORIGINAL: Ridge Runner
wouldn't ever go with magnaporting, would rather have a brake
1) about the same costs
2) it is irreversable
3) you lose barrel length, so in turn your velocity drops
4) much louder than a brake, maybe not so much as loudness as its the sharp ear piercing crack that is almost unbearable, I know wear hearing protection, but I just don't feel right wearing ear plugs in the field when I'm lookin and listening for telltale signs of game.
RR
ORIGINAL: Brush hunter
Yes it is, what rifle are you using and is it Mag-N-Ported? I had mine done, and with my Elk Loads the felt recoil is about the same as my .308
ORIGINAL: jkrajcovic
Is it possible to reload 300 win mag light enough to compare to a 30-06 or a 308 (a deer round) without going as light as the managed recoil rounds?
What kind of powder would you use and how much?
Is it possible to reload 300 win mag light enough to compare to a 30-06 or a 308 (a deer round) without going as light as the managed recoil rounds?
What kind of powder would you use and how much?
1) about the same costs
2) it is irreversable
3) you lose barrel length, so in turn your velocity drops
4) much louder than a brake, maybe not so much as loudness as its the sharp ear piercing crack that is almost unbearable, I know wear hearing protection, but I just don't feel right wearing ear plugs in the field when I'm lookin and listening for telltale signs of game.
RR
#14
Fork Horn
Join Date: Dec 2007
Posts: 204
RE: 300 win mag
Here is a link to a recoil calculator. It works pretty well.
If you are trying to prevent to much meat damage I would suggest using a premimum bonded bullet in a heavier weight. It is less likely to violently expand on a thinner skinned animal such as a deer. The expansion will be more controled and you will see less damage even if bone is hit. Large for caliber bullets also work well at moderate velocities and don't require being bonded. The Sierra Game King for example.
If you are trying to prevent to much meat damage I would suggest using a premimum bonded bullet in a heavier weight. It is less likely to violently expand on a thinner skinned animal such as a deer. The expansion will be more controled and you will see less damage even if bone is hit. Large for caliber bullets also work well at moderate velocities and don't require being bonded. The Sierra Game King for example.
#15
Join Date: Jan 2005
Location: Somewere on Mt. St.Helens
Posts: 347
RE: 300 win mag
ORIGINAL: Ridge Runner
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
We checked noise levels with a decible meter, the question came up about noise. fact is they all make the firearm louder. All we had at the time were 3 Winchester model 70's. The first one with no brake...161 DB, the second with mag-na-port...163 DB, the third was a boss 167 DB. We did not have a vais or a QD Holland.
#16
Nontypical Buck
Join Date: Jan 2008
Location:
Posts: 1,408
RE: 300 win mag
ORIGINAL: Brush hunter
The tip of the bullet will be at the end of the barrel by the time the gas is released, you don't lose any barrel length orvelocity.
We checked noise levels with a decible meter, the question came up about noise. fact is they all make the firearm louder. All we had at the time were 3 Winchester model 70's. The first one with no brake...161 DB, the second with mag-na-port...163 DB, the third was a boss 167 DB. We did not have a vais or a QD Holland.
ORIGINAL: Ridge Runner
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
We checked noise levels with a decible meter, the question came up about noise. fact is they all make the firearm louder. All we had at the time were 3 Winchester model 70's. The first one with no brake...161 DB, the second with mag-na-port...163 DB, the third was a boss 167 DB. We did not have a vais or a QD Holland.
Take a barrel and shoot it over a chrono, then manga port it and shoot it over the chrono again. I'd bet my house on the results.
#17
Join Date: Jan 2005
Location: Somewere on Mt. St.Helens
Posts: 347
RE: 300 win mag
ORIGINAL: spaniel
If this were true, you could just magna port the last foot of the barrel and take off even more recoil without giving up velocity. I think you need to rethink the physics of this.
Take a barrel and shoot it over a chrono, then manga port it and shoot it over the chrono again. I'd bet my house on the results.
ORIGINAL: Brush hunter
The tip of the bullet will be at the end of the barrel by the time the gas is released, you don't lose any barrel length orvelocity.
We checked noise levels with a decible meter, the question came up about noise. fact is they all make the firearm louder. All we had at the time were 3 Winchester model 70's. The first one with no brake...161 DB, the second with mag-na-port...163 DB, the third was a boss 167 DB. We did not have a vais or a QD Holland.
ORIGINAL: Ridge Runner
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
ok, when they cut the magnaport slots in a say 26" barrel, the ports take up approx. 2" of barrel, the barrel length stays the same but the gasses exit at 24" so your actualy only shooting 24" barrel velocities. when you put a brake on it you add the brake to the existing barrel length, so you don't lose velocity is this not correct?
I've shot magnaporting, boss, vais, and QD Holland brakes, they're all loud, but the magnaporting hurts my ears worst of all, followed by the boss, the vais and the holland brakes in that order.
I shoot alot of long range targets, and shoot deer at extreme range where seeing the bullet impact through the scope is imperative, I'll take the holland brake every time, more and bigger holes for the gas to escape more of a big boom than the sharp ear piercing crack of the magnaporting and the brakes with various small round holes in them.
RR
We checked noise levels with a decible meter, the question came up about noise. fact is they all make the firearm louder. All we had at the time were 3 Winchester model 70's. The first one with no brake...161 DB, the second with mag-na-port...163 DB, the third was a boss 167 DB. We did not have a vais or a QD Holland.
Take a barrel and shoot it over a chrono, then manga port it and shoot it over the chrono again. I'd bet my house on the results.