360 Dan Wesson
 

Any one load 360 Dan Wesson for a H&R 357 rifle I loaded 180 Hornady Sp wih 16.5 gr of WW296 today load and eject perfect expect better speed with this load.

RE: 360 Dan Wesson
 

A 360 DW is a shortened .357 max....or a lengthened .357 mag. I have no clue where you'd get laoding data from but if it were me I'd take that bit of info. and start from there. You could also contact somebody like David White about punching it out to a 'max', more data, more power and more available brass.

RE: 360 Dan Wesson
 

I can rent a reemer cheaper than sending To David, He does great work. I wanted to try with the 360 DW I have seen good resulrs and have not had to go to the max.

RE: 360 Dan Wesson
 

Curious if you have correct headstamped brass and where you got it. I had a .357 max carbine TC for a while....21" full bull SS. With 180 gr. Hornady SSP bullets and a case full of AA1680 I would get 2100 FPS. Just for reference.

RE: 360 Dan Wesson
 

I have starline brass stamped 360 DW purchased new from Midway USA.

RE: 360 Dan Wesson
 

Load data for the .360 Dan Wesson can be found at www.handloads.com. If you are considering rechambering for the .357 Maximum, I suggest talking to Mike Bellm at www.bellmtcs.com about his chamber design first.

RE: 360 Dan Wesson
 

I use 18 gr w296 with a 180 gr hornady spsp pointed bullet for single shot handguns better BC. I don't think i amgoing to mess with the max right know seems to be a shortage of brass.