heya folks!
welp ok here we go, have a batch o knives for you to take a gander at
all are new except the first one,( that one was finished a few weeks back) which many of you have seen before
all the ones FOLLOWING that knife are done in 5160 1977 ford f150 leaf spring, are beefy with 1/4 in thick steel, are hand forged and differentially heat treated, then profiled with files. also all the sheaths shown are vegtan and are hand stitched.
I don't take paypal but do have a merchant account and CAN take MC and visa
checks and MOs are fine as well as long as they are US postal orders.
everything comes with my lifetime of the maker warranty, this does include the sheaths.
shipping is included on all prices and all prices are FIRM.
if your a dealer I very much want to talk about wholesale on all the EDC knives, ie everything here except the first blade.
welp with no further adieu lets get this show on the road!
ok this first one many of you have already seen
entirely hand done,
forged to shape, profile and bevels further defined with files
finished with stones and paper. guard hotpunched and filed, etcetcetc
built handle 3/4 tang OAL is 12 inches with a 6 1/2 inch blade.
o1 tool steel, bleach etched, guard is mild steel, bolster is wrought iron, handle is curly maple pinned with steel and brass.
Im asking 450 for it without a sheath.
==========================================
this next one I call the Devils Tail
its handled in Brazilian cherry
pinned in brass
OAL is 8 inches with a 4 inch blade
asking 155.00
SOLD
===============================================
ever been out camping and find that cutting veggies for the stew is a PITA without a good cooking knife?
well me too! so I came up with this design ie a cross between a camper and a cleaver!
handled in curly maple, pinned in copper
OAL is 8 3/4 inches
blade is 4 5/8 from the choil to the tip
and 2 inches wide from the spine to the edge
asking 135.00
SOLD
===============================================
this next one is your basic fish bellied camper done with a really neato piece of hickory for the handle. pinned in brass
OAL 9 "
blade is 5 1/2 inches
asking 110.00
next is a nice little drop point camper done in brazilian cherry and pinned in copper
oal 8 and 1/2 inches
blade is 4 and 3/4 inches
asking 110.00
this next one is my take on bushcrafter style knives
its done in curly maple with copper pinning, there is some slight blemishing around the rear pin so Ive decided to ask less than I would have
the sheath unfolds from itself to allow you to clean it out.
OAL 9 1/2 inches with a 5 1/4 inch blade
asking
SOLD
knives for sale
