I went to the range today to work on a load for my 257 Bob. I think I found a load, but I wanted to share with all of you what a 110gr Accubond looks like after hitting sand and sandstone. I was rather impressed how well they held up considering what they were hitting.
BTW, the loads I have selected so far with this bullet are:
1) 47.5gr Reloader 19, W-W brass, Rem. 9-1/2 Primers, seated to 2.835
2) 37.5gr IMR 4064.....everything else is the same.
I don't have a chrony, so I have no idea what these loads produce velocity wise, but the first load is a tad over max and the second is 1gr under max. No signs of pressure. I'm going to work with them a little more before I settle one.
Here's the pic:

From left to right: 55.9gr, 53.1gr, 53.2gr, & 46.2gr.