Need your help!!!

[20gaugeNate]

k when I was takin my 870 express apart I took of the slide and I didnt know that the breech bolt was supposed to come off so I put it back on with out putting it on the action bars now its stuck way back there and I cant get it out. So if you know how to get It out please tell me THANKS!!!

[BENOUTHUNTIN]

So, you have already got yourself a shotgun?
Nate, tip it upside down. Then smack the crap out of it. Make sure you use only your hand to hit it.

[20gaugeNate]

i cant get it to go further than the ejector

[bigbulls]

Drive out the pins that hold in the trigger assembly and remove it from the gun. That will free everything up back there and the bolt should just slide out.

[20gaugeNate]

thats what I was going to do but I couldn't figure out how

[charlie brown]

One thing I did when I got my Mossy 500 12 guage, is I took it to the local gun shop and had the smith show me how to disassemble and reassemble the shotgun. Probably would be the best way to learn. The manual should show you how to disassemble the gun also. Don't be ashamed to take it to a smith. Better safe than sorry, and you won't be the first person to do, I can almost guarentee that.

I have had to take an old Remington .22 in because I got it taken apart but couldn't get it back together. You pull one pin on that thing and it falls apart. When putting it back together, you have to hold three different pieces in place, two of which are spring loaded, say a few cuss words, hold you breath, put your tounge in the exact right position and pray it works on the first try, otherwise repeat.

[20gaugeNate]

Does any one know how to take off the trigger of an 870 express?

[charlie brown]

Do you have the owner's manual handy?

I sent you a pm

[20gaugeNate]

ya all it says is tap the pins.

[20gaugeNate]

ok Its put together (thanks to charlie brown). And thanks for all the help everyone else!