Go Back  HuntingNet.com Forums > Firearms Forum > Guns
Beddding the lug...... >

Beddding the lug......

Guns Like firearms themselves, there's a wide variety of opinions on what's the best gun.

Beddding the lug......

Old 01-27-2002, 04:56 PM
  #1  
Host of Hosts
Thread Starter
 
PABuck_HNTR's Avatar
 
Join Date: Feb 2003
Location: Erie, Pennsylvania
Posts: 5,780
Default Beddding the lug......

How much is enough?

I have been working on a rifle that was bedded at the factory. I don't know if it should be redone or if I should leave it alone.

there isn't much product. there is a little bit in the stock where the recoil lug is cutout, and there is maybe a silver dollar sized gob in front of the lug under the receiver.

Anyone else ever done their own?
PABuck_HNTR is offline  
Old 01-27-2002, 06:32 PM
  #2  
Fork Horn
 
Join Date: Feb 2003
Location: Baxter Tennessee USA
Posts: 117
Default RE: Beddding the lug......

How does it shoot? Does the barrel make contact anywhere? If it shoots good, I would leave it alone. If not then maybe float it and bed the action better. I have done this to a few rifles and most respond well.
TN_Hunter is offline  
Old 01-27-2002, 06:32 PM
  #3  
Giant Nontypical
 
Join Date: Feb 2003
Location: fort mcmurray alberta canada
Posts: 5,667
Default RE: Beddding the lug......

What kind of rifle is it?I have seen what you describe on a few model 70's.One was a friends gun that we couldn't get to shoot better than 2 inches with any load.After rebedding it properly it now shoots 1-1/4" groups which is still not great but a big improvement.
stubblejumper is offline  
Old 01-27-2002, 06:45 PM
  #4  
 
Join Date: Feb 2003
Location: Fayetteville Arkansas USA
Posts: 319
Default RE: Beddding the lug......

I have glassed in several guns including semi-autos. First is there a problem with it's accuracy? Second is the stock wood or synthetic? I asume it's wood. If you want to you can bed the action and free float the barrel at the same time sealing the inside if the barrel channel with glass-bedding so it will not draw moisture and warp. Thats the standard full treatment for a bolt-action sporter. If it needs it. But if its a shooter I'd leave it alone. At the least you may want to apply a THIN coat of epoxy to seal any exposed wood on the inside of the stock.
BigEd is offline  
Old 01-27-2002, 07:34 PM
  #5  
Host of Hosts
Thread Starter
 
PABuck_HNTR's Avatar
 
Join Date: Feb 2003
Location: Erie, Pennsylvania
Posts: 5,780
Default RE: Beddding the lug......

The stock is wood, I removed the factory pressure point at the tip and the accuracy improved, the barrel is free floated to where if I slide a piece of paper between the stock and barrel it moves freely up to the front of the action. It does shoot pretty good. 1in groups at 100 with handloads. And I can get 1 1/4 groups from Remington Core Lokts.

Should I quit playing and leave it alone?
PABuck_HNTR is offline  
Old 01-28-2002, 09:14 PM
  #6  
Nontypical Buck
 
Join Date: Feb 2003
Location: Oakland OR USA
Posts: 2,929
Default RE: Beddding the lug......

As the man says "If it aint broke don't fix it "
halcon is offline  
Old 01-28-2002, 11:49 PM
  #7  
 
Join Date: Feb 2003
Location: Fayetteville Arkansas USA
Posts: 319
Default RE: Beddding the lug......

Yep if you're satisfied, leave it alone.<img src=icon_smile_wink.gif border=0 align=middle>
BigEd is offline  
Old 01-29-2002, 06:17 AM
  #8  
Typical Buck
 
Join Date: Feb 2003
Location: Greensboro NC USA
Posts: 563
Default RE: Beddding the lug......

I would remove the factory bedding glob, and pillar bed the receiver, including 2&quot; forward of the recoil lug, then free float it from there on out.
1SHOT_1KILL is offline  
Old 01-29-2002, 05:34 PM
  #9  
Host of Hosts
Thread Starter
 
PABuck_HNTR's Avatar
 
Join Date: Feb 2003
Location: Erie, Pennsylvania
Posts: 5,780
Default RE: Beddding the lug......

1SHOT1KILL, I think i've seen you recommend that process to someone else a while back.

I'll try it, what the heck!

Another question for ya. Is the fact that a piece of paper slides between barrel and stock really considered &quot;free floating&quot;? Or does more material have to be removed that that? If I look at my Anschutz target .22 it is a good 1/8 gap between barrel and stock.

What do you think?
PABuck_HNTR is offline  
Old 01-29-2002, 05:37 PM
  #10  
Host of Hosts
Thread Starter
 
PABuck_HNTR's Avatar
 
Join Date: Feb 2003
Location: Erie, Pennsylvania
Posts: 5,780
Default RE: Beddding the lug......

Should I attemp the bedding job myself, and what product do you recommend??

Edited by - fight4yourguns on 01/29/2002 18:47:58
PABuck_HNTR is offline  

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.