logo
 

Go Back   HuntingNet.com Forums > Firearms Forum > Guns

Guns Like firearms themselves, there"™s a wide variety of opinions on what"™s the best gun.

Reply
 
Thread Tools
Old 10-26-2010, 02:55 PM   #1
bigcountry
Guest
 
Posts: n/a
Default Anybody own 300whisper?

Seen one shoot with a can and it was very accurate, and of course dead quiet.
  Reply With Quote
Old 10-27-2010, 08:58 AM   #2
Nontypical Buck
 
Join Date: Mar 2004
Posts: 2,160
Default

I watched a video a while back. This guy's wife was on safari. No clue what she was shooting but on the end of the barrel was something that looked like a can, about the size of a soda can. Is that what you're talking about? They never explained what the thing was.
UncleNorby is offline   Reply With Quote
Old 10-27-2010, 12:36 PM   #3
bigcountry
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by UncleNorby View Post
I watched a video a while back. This guy's wife was on safari. No clue what she was shooting but on the end of the barrel was something that looked like a can, about the size of a soda can. Is that what you're talking about? They never explained what the thing was.
Can/Silencer/sound suppressor. All the same thing.

300whisper is a round that is a 221fireball or 223 necked up to 308 and shot with a 220-240gr high BC bullet that will stay subsonic so it can be silenced.

Just because she had a sound suppressor doens't exactly mean she was shooting a whisper round.

Just wondering if anyone owned one on here. I saw on an AR lower that was dead quiet. Impressed with the accuracy.

http://www.youtube.com/watch?v=qPVloZ8Ubng
  Reply With Quote
Old 10-28-2010, 03:48 AM   #4
Nontypical Buck
 
Join Date: Mar 2004
Posts: 2,160
Default

So, a 240 gr bullet at less than 1,126 fps. I'm sure it will kill deer, but what kind of effective range do you expect?
UncleNorby is offline   Reply With Quote
Old 10-28-2010, 07:31 AM   #5
bigcountry
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by UncleNorby View Post
So, a 240 gr bullet at less than 1,126 fps. I'm sure it will kill deer, but what kind of effective range do you expect?
Thats the beauty of running below the sound barrier. As long as your velocity's std dev or spread is low (like 5-10fps) there is no limit of effective range until the bullet runs out of steam. Using a 240gr matchking with a bullistic Coef of over .6 starting out at 1086fps, you only go down to 900fps at 400 yards. Thats whats so great about high BC.

Your limit most likely will be your scope elevation adjustment. With 100 yard zero, you would have to raise elevation 50MOA to hit at 400 yards. Most target scopes run out of elevation adjustment at 56MOA. Thats using a 30MOA base.
  Reply With Quote
Old 10-28-2010, 01:51 PM   #6
Nontypical Buck
 
Centaur 1's Avatar
 
Join Date: Nov 2007
Location: Titusville Florida
Posts: 1,666
Default

I would think that range would be limited to how accurate you are. There wouldn't be much expantion with that velocity and if they designed a bullet that did expand, penetration would be limited. It's my understanding that you need to take head or neck shots with this round. You could probably get a through and through on a deer if shot behind the shoulder, but it would be like using an arrow with a field point on it.
__________________
Diamond Justice 65# 29"DL
Gold Tip XT Hunter 5575 27.5"
Spot-Hogg Hunter Hogg-it w/wrap
QAD Ultra-Rest HD, Limbsaver M6 Quiver
Custom Stab w/Limbsaver modular nodes and QD
Centaur 1 is offline   Reply With Quote
Old 10-28-2010, 07:01 PM   #7
bigcountry
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Centaur 1 View Post
I would think that range would be limited to how accurate you are. There wouldn't be much expantion with that velocity and if they designed a bullet that did expand, penetration would be limited. It's my understanding that you need to take head or neck shots with this round. You could probably get a through and through on a deer if shot behind the shoulder, but it would be like using an arrow with a field point on it.
240gr of lead at 900fps and you don't think you could get the job done??? Ok.
  Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 

All times are GMT -8. The time now is 12:00 PM.