logo
 

Go Back   HuntingNet.com Forums > Firearms Forum > Guns

Guns Like firearms themselves, there"™s a wide variety of opinions on what"™s the best gun.

Reply
 
Thread Tools
Old 03-23-2008, 01:23 AM   #1
 
Join Date: Dec 2005
Location: Kalaheo Hi.
Posts: 319
Default can 2 3/4 " slugg fit in 3" chamber

Hi All ,
So Id like to try a little Stevens model 94 shotgun out that my dad left me and on the rifle it says it has a 410 bore and 3 inch chamber. So I let a friend know I needed ammo and he brought me 2 3/4" slugs and shot. Do I need three inch or will the 2 3/4 work . I load one shot at a time if that makes a difference , its an old , old gun. Thanks for any input guys and gals.
__________________
2008 PSE Stinger
W.B . Drop Tine
G5 1/4 peep
carbon express
tru ball cyclone
NAP Thunderheads 100 grain
copper john dead nuts site
paka is offline   Reply With Quote
Old 03-23-2008, 02:06 AM   #2
 
Join Date: Dec 2005
Location: Kalaheo Hi.
Posts: 319
Default RE: can 2 3/4 " slugg fit in 3" chamber

The ammo he brought was 20 gauge. 410 and 20 gauge are two differnt types of rifles arent they??
__________________
2008 PSE Stinger
W.B . Drop Tine
G5 1/4 peep
carbon express
tru ball cyclone
NAP Thunderheads 100 grain
copper john dead nuts site
paka is offline   Reply With Quote
Old 03-23-2008, 02:10 AM   #3
Nontypical Buck
 
Join Date: Feb 2003
Location: Oakland OR USA
Posts: 2,928
Default RE: can 2 3/4 " slugg fit in 3" chamber

Two different gauges of shotgun to be exact . 2 3/4" shells work fine in a 3" shotgun, just not the other way around .
halcon is offline   Reply With Quote
Old 03-23-2008, 07:21 AM   #4
Giant Nontypical
 
Join Date: Jan 2004
Location: Eastern PA
Posts: 6,247
Default RE: can 2 3/4 " slugg fit in 3" chamber

Actually, the 20 is a gauge and the .410 is a caliber. You cannot shoot 20 ga in a 410 nor a 410 in a 20 ga if only because of the obvious size difference.
In your 410 single shot, as long as it has 3" marked on the barrel, you can shoot 2 1/2", 2 3/4" or 3" 410 shells in it without any fear of damage.
__________________
PLEASE NOTE THAT DUE TO THE RISING COST IN AMMO PRICES I WILL NO LONGER BE FIRING A WARNING SHOT.

A government big enough to give you everything you want is big enough to take away everything you have.
I'm not as good as I'm gonna get - but I'm better than I used to be.
"Life without God is like an unsharpened pencil - it has no point."
bronko22000 is offline   Reply With Quote
Old 03-23-2008, 09:23 AM   #5
Typical Buck
 
Seif5034's Avatar
 
Join Date: Jan 2008
Location: Mississippi
Posts: 570
Send a message via Yahoo to Seif5034
Default RE: can 2 3/4 " slugg fit in 3" chamber

thanks for posting this. I was actually recently wondering the exact same thing about my GF's stevens 20ga. (3" kicks too hard for her)
__________________
My Wife - "I want to try Turkey hunting"

My thoughts -
Seif5034 is offline   Reply With Quote
Old 03-23-2008, 10:33 AM   #6
 
Join Date: Dec 2005
Location: Kalaheo Hi.
Posts: 319
Default RE: can 2 3/4 " slugg fit in 3" chamber

Bronko22000 ,
Got itThanks so much. By any chance do they make 410 slugs
__________________
2008 PSE Stinger
W.B . Drop Tine
G5 1/4 peep
carbon express
tru ball cyclone
NAP Thunderheads 100 grain
copper john dead nuts site
paka is offline   Reply With Quote
Old 03-23-2008, 10:41 AM   #7
Nontypical Buck
 
Maine Shooter's Avatar
 
Join Date: Feb 2005
Location: Maine
Posts: 1,327
Send a message via Yahoo to Maine Shooter
Default RE: can 2 3/4 " slugg fit in 3" chamber

Yes, there are .410 slugs available. Check the ammo manufacturers for what they each offer.
Maine Shooter is offline   Reply With Quote
Old 03-23-2008, 10:48 AM   #8
Typical Buck
 
Adirondack Hunter's Avatar
 
Join Date: Feb 2006
Location: Inlet, New York
Posts: 640
Send a message via AIM to Adirondack Hunter
Default RE: can 2 3/4 " slugg fit in 3" chamber

yeah 2.75s will work just fine, however if you had a 12g, and tried fitting 3.5s in a barrel that said 3in, youd end up takin it to the gunsmith to get em out.

with shotguns they awlays say how big ofa shell you can put in em, if it says 3in, you can put 3in, and 2 3/4in in it.

another thing ti remember is always make sure you have the right guage
__________________
Remington 870 12g custom tactical
Benelli Super Black Eagle 2 12g
Ruger 10/22
Stag model 15 5.56mm x 45
Remington 700 .22-250 custom varmint/tactical
Adirondack Hunter is offline   Reply With Quote
Old 03-23-2008, 03:46 PM   #9
Giant Nontypical
 
eldeguello's Avatar
 
Join Date: Feb 2003
Location: Texas - BUT NOW in Madison County, NY
Posts: 6,277
Default RE: can 2 3/4 " slugg fit in 3" chamber

"Can 2 3/4 " slugg fit in 3" chamber??" Why coitinley!! But not vice versa!!

However, I'd sure like to see you get a 20-ga. shell in a .410 chamber!! Or even get a 28-ga. shellin a .410 chamber!

BTW, you are talking about SHOTGUNS here, NOT RIFLES!!
__________________
"Bitte, trinks du das Wasser nicht. Dahin haben die Kuhen gesheissen."
eldeguello is offline   Reply With Quote
Old 03-23-2008, 04:55 PM   #10
Boone & Crockett
 
bigbulls's Avatar
 
Join Date: Feb 2003
Posts: 10,605
Default RE: can 2 3/4 " slugg fit in 3" chamber

It its simplest terms the "gauge" is the diameter of the inside of the barrel. You can not interchange shells. IE... you can't shoot a 410 in a 20, can't shoot a 20 in a 12. can't shoot a 28 in a 16, etc... etc...
(for all that will correct me I know that the .410 is not a gauge but I am keeping it simple here)

As far as shell length goes you can always shoot shells that are shorter than what it marked on the barrel but not longer than what is marked on the barrel.
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
bigbulls is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
.243 won't chamber cjohnson3006 Reloading 19 04-02-2009 11:30 AM
Cut Chamber To???????? HEAD0001 Reloading 11 03-02-2007 04:12 PM
Cleaning the chamber kory Guns 5 08-15-2004 03:53 PM
12gauge rem 870 syn 26" 3"chamber ? mallardman12 Waterfowl Hunting 10 07-15-2004 02:50 PM
45 ACP chamber recoiljunky Guns 1 02-23-2003 03:23 PM

 

All times are GMT -8. The time now is 09:14 AM.