I was at the gun shop near my house today and I saw they have a Winchester Model 70. It is a wood-stocked model, one of the old style ones with the thin white piece between the stock and the darker-coloured cap. It is chambered in .25-06 and has scope rings on it (the scope rings don't have any brand markings. The bore looks clean, as does the bolt. I tried searching on gun broker and only saw one rifle, a classic one, that was chambered in .25-06.
Now my questions:
1) Could I replace the barrel on this rifle with a .30-06 barrel? I saw some of those for sale fairly inexpensive.
2) Would a pre-1964 barrel fit on any Model 70? I saw some barrels that were marked pre-64 and am curious whether I could use those.
3) Do you think this rifle is a pre-64 version? I do not know how to tell the bolts apart since I haven't compared them. I think I saw that the serial number was 5XX,XXX but I am not entirely sure, and I saw on Wikipedia that the ones below 700,000 are pre-64.
1) yes
2) First part... no. Second part...yes if it is a pre64 receiver but you would have to likely set back the shoulder, rechamber, set back the breech face, and recut the extractor cut in the breech face.
3) don't know with out either the serial # or looking at it.
4) Don't know with out looking at it. But if it is, in fact, a pre 64 rifle then yes it will very likely be worth $450.
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Big bulls got 1 & 2... I'll expound on 3 & 4, not that he is wrong or anything.
Quote:
ORIGINAL: Pickerel
3) Do you think this rifle is a pre-64 version? I do not know how to tell the bolts apart since I haven't compared them. I think I saw that the serial number was 5XX,XXX but I am not entirely sure, and I saw on Wikipedia that the ones below 700,000 are pre-64.
4) Is this gun worth $450?
I appreciate your help.
3) If the serial number is under 600,000 than that shows a date of man. of 1963 or earlier. According to winchester there were no model 70 actions issued serial numbers in the 600,000s. Post 1964 action production started with serial numbers begining at 700,000. So while the wording is a bit off, wikipedia is essentially correct. As long as your memory/eyes serve you right and the serial number was in the 500Ks, it is a pre-64. Anything in the 500s will mean that is was made anytime from about 1956 or so up to 1963. Exact year depends on exact serial number. Just about any book that lists anything about date of manufacture will include Winchester model 70s... just flip to the glossary in the back.
4) As BB wrote, sight unseen there is no telling. Though I will say will almost zero excetptions that true pre-64 Winchester actions in sound working condition are worth at least $450 on their own.... nevermind the gun. So basically yes, its a decent buy.
__________________ You get what you put in, and people get what they deserve. - Kid Rock
2) First part... no. Second part...yes if it is a pre64 receiver but you would have to likely set back the shoulder, rechamber, set back the breech face, and recut the extractor cut in the breech face.
You would still have to do this if it was a pre-64 barrel on a pre-64 receiver? My thoughts behind getting a .30-06 barrel is it would be less expensive to shoot, and I wouldn't be wearing the original barrel out, and .25-06 is based on .30-06 so I would think if I was using a .30-06 barrel I wouldn't have to change anything beside the barrel.
If I sound stupid it probably has to do with me being 19, from an anti-gun family, and having only a .22 Savage and a Remington 870 to dabble with as of now.
Also, I will be back there Wednesday or at the latest Thursday so I will confirm the serial number inspect it more closely. From what I saw there was only one noticeable ding on the side of the stock, maybe an inch long that looked like it struck a round pole or something.
You would still have to do this if it was a pre-64 barrel on a pre-64 receiver?
You could get lucky but I highly doubt it.You would still need to do all of this. Headspace is set to only a few thousandths of an inch.Tolerances between the receiver, bolt face, bolt lugs, and chamber from one rifle to another can get off by alot.
Honestly ifthe barrelwere in good condition and was a pre-64 thenI wouldn't touch it. Now, ifthe receiver is in good shape but the barrel crapped out thenI would just get a brand new barrel installed on it and make a custom rifle and keep it forever.
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Gotcha. I was mainly looking for a centerfire rifle I could shoot for fun, but I saw this and just had to look into it. If I verify it is a pre-1964 Model 70 and it's $450, I don't think I will be able to pass it up. If it isn't pre-1964, then I guess I save up in case I win a fight with my four friends over who gets to buy the M14 that we found in like new condition, with a four-digit 36XX serial number, that recently arrived at the gun shop near my house. We must have spent an hour drooling over that...
Honestly ifthe barrelwere in good condition and was a pre-64 thenI wouldn't touch it.
I mean, I would pay the $450 and run away as fast as I could and not do any modifications to it but I would definetly shoot it and hunt with it.
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Honestly ifthe barrelwere in good condition and was a pre-64 thenI wouldn't touch it.
I mean, I would pay the $450 and run away as fast as I could and not do any modifications to it but I would definetly shoot it and hunt with it.
Ahh, that makes more sense to me. I think that if the barrel wasn't good, then I would without a doubt buy a .30-06 barrel and find the same model of Unertl scope that Carlos Hathcock used and make a duplicate of his rifle...
Winchester Model 70 questions
