Ring height for 44mm objective lens?
I'm piecing a new toy together and need to know if 44mm objective scope with Parallax adjustment will require high rings or if I can get away with medium rings.
I'll be placing my order later this morning and might purchase the rings locally ifI can't figure this out before then, thanksfor your time. |
RE: Ring height for 44mm objective lens?
It depends on the ring manufacturer. For example, if they are Warne rings, it may require a medium but a low may fit (barely). Check the websites for the manufacturers. They usually list height requirements. If Talley, you can usually use low rings up to 44mm objective lens' and mediums up to 50mm (with standard barrel contours).
|
RE: Ring height for 44mm objective lens?
It also matters whether your scope has a 1" tube or 30mm tube. The bigger diameter tube will let you go with lower rings.
|
RE: Ring height for 44mm objective lens?
For my 44mm's I have always used mediums...
|
RE: Ring height for 44mm objective lens?
What kind of rifle and in what caliber? What type of ringmounts and then finally what brand of medium scope?
|
RE: Ring height for 44mm objective lens?
It's also going to depend on the action and barrel profile. My 17 HMR has low rings with a similar scope but the objective is VERY close to the barrel.
Paul |
RE: Ring height for 44mm objective lens?
ORIGINAL: oldelkhunter What kind of rifle and in what caliber? What type of ringmounts and then finally what brand of medium scope? Remington 700SPS Varmint in .308 finally:D (new shipment of 25 in at my dealers source) Scope- Burris Signiature 4-16 x 44m BALLPLX Mat PA (about to order) Rings & Base-I was looking at Leupold because that what I've used in the past, (with success anyways) I've tried going cheap before and paid the price. |
RE: Ring height for 44mm objective lens?
Here is what I've got coming so far- Remington 700SPS Varmint in .308 finally:D (new shipment of 25 in at my dealers source) Scope- Burris Signiature 4-16 x 44m BALLPLX Mat PA (about to order) Rings & Base-I was looking at Leupold because that what I've used in the past, (with success anyways) I've tried going cheap before and paid the price. |
RE: Ring height for 44mm objective lens?
No I haven't. I was thinking 2 piece for ease of loading & cleaning.
Speaking with the Tech at Natchez supply on the phone the bull barrell is going to make the ring height iffy on the mediums. He recommended buying them locally to make sure they are correct. |
RE: Ring height for 44mm objective lens?
Mediums will work just fine...I can mount lows with a Kahle 50mm and you can slip a piece of paper between it and the barrel so I use mediums. The Kahles and SWaro scopes can be mounted real low because of their scope bell.
|
All times are GMT -8. The time now is 06:44 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.