RE: Help, How to clean a rough bore???
Jeepkid's right. Take a patch and put a very light coat of JB's Compund on it. Place the patch over a brush thats sized lower than your bore so the combo fits nicely into the barrel. Several strokes from front to back and then remove the system. You'll probably need to do this a second time if the barrel is that rough.
Good luck.
__________________
" Never shall a mechanical broadhead enter my quiver "
Mathews Drenalin- 66.5 lbs
Carbon Express 3D select 200's
#1 Slick Trick 85's or #2 G5 Montecs 85's
Vital Gear sight and rest
|
