logo
 

Go Back   HuntingNet.com Forums > Firearms Forum > Guns

Guns Like firearms themselves, there"™s a wide variety of opinions on what"™s the best gun.

Reply
 
Thread Tools
Old 12-22-2005, 07:58 AM   #1
 
Join Date: Aug 2003
Posts: 162
Default Action Spring for Benelli SBE

My SBE action spring is starting to stick. I am going to clean it out real good again. But I was was thinking of replacing it with a new one. Does anyone know the best place to order one from? Also I have heard about a faster one, stiffer one. Can anyone explain if they are worth getting and can I still shoot 1 1/8oz target loads with it?
drh1175 is offline   Reply With Quote
Old 12-22-2005, 08:38 AM   #2
Nontypical Buck
 
Rammer's Avatar
 
Join Date: Aug 2005
Location: South Dakota
Posts: 2,864
Send a message via AIM to Rammer
Default RE: Action Spring for Benelli SBE

I put an aftermarket spring kit in the first Benelli I ever owned and that gun shucked anything and everything I put in it thru it. I can't remember the name of the kit, but I did buy it at a gunshop that sold Benellis.
Rammer is offline   Reply With Quote
Old 12-22-2005, 09:17 AM   #3
 
Join Date: Aug 2003
Posts: 162
Default RE: Action Spring for Benelli SBE

yes that is what I am looking for. if anyone knows where I can order one please let me know.
drh1175 is offline   Reply With Quote
Old 12-22-2005, 06:30 PM   #4
Boone & Crockett
 
bigbulls's Avatar
 
Join Date: Feb 2003
Posts: 10,605
Default RE: Action Spring for Benelli SBE

It's a Sure Cycle. We sell them for $129.99. Which is only about $10 more than a factory Benelli. And also about 6 months quicker getting one. Benelli is about the slowest company for getting parts I have ever seen.[:'(]

If you can't find on let me know. As of right now we have them in stock for the SBE.

Yes, they are absolutely worth installing in your gun.

http://www.surecycle.com/default.asp
__________________
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency........... Blaming the prince of the fools should not blind anyone to the vast confederacy of fools that made him their prince. The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
bigbulls is offline   Reply With Quote
Old 12-22-2005, 09:24 PM   #5
Fork Horn
 
Join Date: Nov 2003
Location: West Michigan
Posts: 305
Default RE: Action Spring for Benelli SBE

The sure cycle spring and tube are well built and good if you have problems with rust. They do cost quite a bit. Here is a link for some others that are very good and quite a bit less expenssive.
http://www.gunsprings.com/

Make sure you are not over lubing the spring and tube. Also use a good oil like CLP, FP-10, or Miltec.
Worc is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lever action or Bolt action? 22 guy Guns 37 09-24-2008 04:46 PM
Spring Snow Goose and Spring Turkey Hunts farley Hunts/Outfitters 0 12-14-2005 10:10 PM
short-action or long-action redsox3624 Guns 3 01-05-2005 10:26 AM
Custom building a short action cartridge into a long action receiver? driftrider Guns 6 07-26-2004 05:57 PM
Ithica slug barrel or Benelli slug barrel for Benelli Nova??? Gundigest Guns 1 07-20-2004 08:57 PM

 

All times are GMT -8. The time now is 06:28 PM.