Need scope mount and rings

lswoody · 07-08-2005, 03:52 PM

I have a 1.5x6x32 Simmons Whitetail Expedition scope that I want to put on my Remington 760. I currently have a Redfield 3x9x40 mounted on it with the see-thru mounts. I want to put a base and rings on so that I can have the scope mounted lower on the gun. Not wanting to spend much, but what mount and rings should I get? Also where can I find them? Thanks, Scott Woody

James B · 07-08-2005, 08:54 PM

Just use a Weaver Base and medium Weaver rings. Thats what I have on my 7600.

lswoody · 07-09-2005, 08:20 PM

Thanks James B. Will med height rings be nesscessary with a 32mm scope? I was thinking low rings would work but I don't know. Thanks, Scott Woody

James B · 07-09-2005, 09:51 PM

I thing the low rings will work but I can't say for sure. I like the scopes a little higher than most so I usually just buy all high rings. With 32 mm I think the low ones will work.

thndrchiken · 07-12-2005, 09:17 PM

The low rings would probably work but you probably need to remove the rear sight. Go with the Mediums and it won't be an issue.

HighDesertWolf · 07-13-2005, 12:04 AM

Id just go with weaver mounts myself especially if you are looking to save a buck and still get a quality product.

BareBack Jack · 07-13-2005, 02:06 PM

I have the weaver basr and the low rings,you will have to remove the sights or you will see them on low power.
BBJ

lswoody · 07-13-2005, 03:32 PM

Thanks for the info Guys!!!!!