Need Rem. M81 info.

[will79]

I have a rem. m81 woodsmaster in 35 rem and was wondering if anybody could help me find a blown up parts schematic or any other info tohelp in disassembly-reassembly. I would guess that info on the model 8 and model 81 would be about the same. The gun hasn't been made in so many years that information seems hard to find. I would greatly appreciate any help.

[Pawildman]

You might try Numrich Arms at www.e-gunparts.com They usually have most everything.

[triggerhappy]

[*]Remington Model 8 and 81 Autoloading Rifles. Bob Creamer Send Email - creamer10@comcast.com


I have a model 8 and to take down remove front hand guard and you will see a lever. That lever will remove barrel from reciever. Also the bolt handle is removed by pulling out and depressing pin in middle. You can then slide the bolt assembly out.

Buy the above book it is worth having especially if you own one.

[Pioneer2]

Hi Will, I have The NRA firearms assembly bookthat has a complete 2 page with diagrams for Rem 8 + 81 autoloading rifles.If you have a FAX # i'll send them to you PDQ.Also data for Varget is in the Nosler book 5th edition for the 6.5x55 as follows:100gr bullet/39.9 varget/2897fps,same bullet41.5gr varget/2995fpsand same bullet/43.5grvarget/3094fps MAX LOAD [NORMA CASES IN ALL DATA I'M SENDING]120gr bullet as follows37gr varget/2612fps,39grvarget/2737fps,41gr varget/2828fpsMAX.and lastly 125grbullet/37gr. varget/2607fps,39grvarget/2724fpsand MAX41gr varget for 2824fps.No other data listed for other weights.Good Luck.......Harold PS use at own risk!