nubo

This may sound dumb but I use 100 gr Broadheads for hunting and I use 100gr field points for 3D .What I would like to know is how did I come up with 100gr apposed to 125 gr or even 85 gr and how can I make the various wieght's work better for me ,I'm starting to understand a little about arrow's and BH's from reading articles from 5shot ,MattP/A and some other's Do I match my arrow's with broadheads or do I match my broadheads with arrow's ? This all seem's a little complicated to me so I can sure use the advice .

nubo

bow_huntr

I match the target points grain size with the field points grain size, Im relatively new to Archery hunting, but I think that is the way to do it, thats how I do it.

5 shot

As a rule most heads in the 100 to 125 grn weight will work with most setups. I choose the head weight that ends up shooting best. If weight is a big concern then 100 grn heads would be the a good starting point. If you want a bit more FOC then the 125's would be a good place to start. In the end though I have found little overall differnce.

mrfritz44

Check out this article and the others on this sight. They give a pretty good explanation.

http://bowhunting.com/everythingarrows.asp?page=5

Fritz

nubo

Thank's guy's the article I just read from Mr Fritze has cleared up my question's about arrow's and Broadheads vs weight . This was a good article ,another keeper.

nubo

avid_bowhunter2005

H.S suggests,

55# 85-100 grains
55+ 100-135
traditional around 125-145 range

Of course your other setups will affect your choice, but this is the main thing to go by.