Here is the 3rd 40yd group shot w/ my new bow. The first two groups were used to sight in my 40yd pin.
I know that HCA bows don't get much credit/attention. Which,in my opinion, is from a lack of marketing and advertising. But I'm here to tell you, the '08 Speed Force is truly a pleasure to shoot. At 29', the valley is short but sufficient. The draw is a little aggresive at 75lbs. Very little hand shock and quiet, not muchdifferent thanthe '05 Switchback I had. Except for the additional 30-40 fps w/ the same 400grn arrows. I just ordered some Speed Pros, 5.5grns/in. I'm looking forward to shooting 350+fps and one pin out to 40yds.
BTW...here's a tipon sighting in longer pins. I sighted in my 1st pin for 30yds. Stepped back to 40yds and shot a 3 arrow group at the bullseye using my 30yd pin. Point of impact will tell you exactly where your 40 yd pin needs to be. Now take your bow and simulate a full draw position.While aligning the30yrd pin w/ the bullseye, adjust the 40yrd pin to where the 3 arrows groups. Then fine tune w/ one more group.