question about let off on diamond marquis?

[22 series]

how do u know what let off you bow has and how can u change it? i have a diamond marquis and it feels like the let off is not set at 75%.

[buckeye]

Measure your draw weight and then measure your holding weight and divide them out.

EX. 70 pounds draw weight, with 15 poundsholding weight equals 79% letoff.

100-(15/70)= 79

[jbowersox]

What draw length do you have? You can change it by adjusting the draw stop module on the cam. I've got a 28" and mine is set just under 7.0 for 75%.

[buckeye]

ORIGINAL: jbowersox

What draw length do you have? You can change it by adjusting the draw stop module on the cam. I've got a 28" and mine is set just under 7.0 for 75%.

This depends on the condition of your string and cables.... Your eccentrics must be in factory spec to just slide the draw stop into position and expect the let off and valley to be correct.

[22 series]

my draw length is 28.5 at 65 pounds.

[Deleted User]

[Deleted by Admins]

[buckeye]

ORIGINAL: 22 series

my draw length is 28.5 at 65 pounds.

Youshould be aprox. 7.5 to the center of the draw stop's bolt.

[blockquote]quote:

This depends on the condition of your string and cables.... Your eccentrics must be in factory spec to just slide the draw stop into position and expect the let off and valley to be correct.[/blockquote]


Is there a "correct" let off for each bow ? I just moved the adjustment on my module until I liked it

Yes, there is a correct draw stop setting for each bow which differs with each draw length.