Who here has tried Arthurs "Dynamic tiller" tuning on their bow
I know this should be in the Tech section and I will post it there as well but I also know that this section receives far more attention. I have read through the articles on dynamic tiller adjusting and am really intrigued but a little nervous as well. A lot of the manuals both posted online and from manufacturers talk about making sure their is "even tiller" and so it makes me wonder how this method has worked for you who have tried it. The idea seems sound to me (although I am having trouble picturing how it would not negatively effect my binary cam timing) but I would like to hear from some who have gone through all the strokes. Thanks Travis.
RE: Who here has tried Arthurs "Dynamic tiller" tuning on their bow
I have tiller tuned bows with every cam type out there. Currently I'm shooting a Constitution (binary cam) that has an extra 1/3 turn or so extra on the top limb. It holds much better that way.
RE: Who here has tried Arthurs "Dynamic tiller" tuning on their bow
I did a little tiller tuning on my 05 Hoyt Pro Tec with good results. Wound up backing off the top limb bolt about 1/2 turn. But my first 07 Vectrix XL did not like the limbs being a little uneven - shot best with both limb bolts maxed out and the tiller measuring even at both ends.
__________________
A man has got to know his limitations . . . . .
Who here has tried Arthurs "Dynamic tiller" tuning on their bow
