Help me out please

[OKbowhunter20]

my string silencer keeps poppin off evey 20 shots or so...I've put it back on 3 times[:@]

How do I fix this...I was thinking using serving above and below it would help, but that poses another problem...I dont how to use serving...I know there has been alot of threads on how to do this...If this is the right thing to do then could someone give a link to the thread please?

Thanks

[Washington Hunter]

Serving them in is about the only option...

Do you know how to tie a half hitch?

[OKbowhunter20]

ORIGINAL: Washington Hunter

Serving them in is about the only option...

Do you know how to tie a half hitch?

Im afraid not...I know there have been threads on this before, but we all know how well the search tool works

[Washington Hunter]

Give me a few minutes and I'll see what I can do.

[Washington Hunter]

Step 1 - Take a piece of serving material or dental floss about 12" in length and fold it in half creating a loop. Lay this on the opposite side of your string.



Step 2 - Fold the loop over the string towards you.



Step 3 - Pass the two end pieces of the serving through the loop.



Step 4 - Pull the two end pieces towards you, closing the loop over the top of the string. Pull the serving left and right in order to snug the knot into itself.



Step 5 - Using the two end pieces of serving, create another loop.



Step 6 - Fold the two end pieces over the top of the string and through the loop. Pull snug.





Step 7 - You can finish it up by tying a regular not over the top of the half hitches using the remaining portion of serving.

Do this above and below your string silencers and you should be golden. Just a quick write up, hope it helps.

[OKbowhunter20]

Dan, Thanks alot I really appreciate it....thats why I love this place....quality, knowledgeable, top classpeople

Thanks for going out of your way to help me..ill let you know how it turns out

[Washington Hunter]

For sure, bud. Not a problem.

Now ya know!