Ok, here was my issue. The problem I was having was I could really only get two of the four main mounting holes on the dovetail slide bracket to line up with the holes on my riser. The hard rubber "catch" on the bracket portion of the Soft-lok was interfering with the knob (or I guess the knob was interfering with the quiver). I couldn't get the CJ knob to sit in between the "catches" on the quiver, so I had to move the quiver down and utilize just the top two holes, as you can see in the picture here:
The hole on the mounting bracket closest to you in this picture above was not aligning with the hole on the CJ mount (probably because I slid the quiver down, so I ran a bolt through the back flush with the edge of the riser, which ran through the CJ bracket and random hole on the quiver mount. I just attached a small square nut on the end and tightened it up. Quiver is holding strong, no vibration. The quiver does sit at a slant and looks like this / but not as drastic, when looking down the string.
Here you can see the small bolt running through the back end sight and through the quiver mount. I had to file the edge ot the bolt head down facing the riser to get it to slide through the hole.
Buckeye, I bought this sight used, there was no other bolt. I was unaware there was one (show's you how much I know), and this may have solved my problem early on. Any pictures of this?
That's it Buckeye..ya got me again!
Dagon buckeyes [:@][8D]
]
