Hey guys, I have a lone wolf sit and climber I bought last year and never used it. I can't figure out how to attach the seat back to the tree. Can anyone post pictures of there top part please. It came with a bungee strap that has a plastic hook that slides back and forth on it.
__________________
Hoyt Razortec,
Ripcord Drop Away,
28" inch draw,
Gold tip ultra light Pro 500's
Razor Cap 100 gr
Hoyt Micro Elite Site,
BORN TO HUNT - FORCED TO WORK!
I forgot to mention that the model seat I have has a bungee that slides through the seat with loops on either end.
__________________
Hoyt Razortec,
Ripcord Drop Away,
28" inch draw,
Gold tip ultra light Pro 500's
Razor Cap 100 gr
Hoyt Micro Elite Site,
BORN TO HUNT - FORCED TO WORK!
you can go to the lone wolf web site and look at the manual..... I had to do it a few times when I was trying to keep my Lone Wolf from clanking whn walking thro the woods..... http://www.lonewolfstands.com/lone-wolf-instructions.aspx
the bungee cord with the plastic hook is for attatching your top part to the bottom part to pack out. You use the plastic cable to attatch it to the tree.
what plastic cable craze? my seat has a bungee elastic strap with loops on either end that slides back and forth thru the upper part of the seat.
__________________
Hoyt Razortec,
Ripcord Drop Away,
28" inch draw,
Gold tip ultra light Pro 500's
Razor Cap 100 gr
Hoyt Micro Elite Site,
BORN TO HUNT - FORCED TO WORK!
yep the seat pad. mine has no nylon strap with a snap. it has a bunge chord but with out hooks on the end. It has a loop on either end of the chord.
__________________
Hoyt Razortec,
Ripcord Drop Away,
28" inch draw,
Gold tip ultra light Pro 500's
Razor Cap 100 gr
Hoyt Micro Elite Site,
BORN TO HUNT - FORCED TO WORK!
Arkansas... As someone said. That bungee with the sliding hook is ONLY for packing the stand in and out. It allows you to bungee the top seat portion to the bottom platform portion for carrying! DO NOT USE IT FOR TREE ATTACHMENT!
On the back of both the platform and the seat. You'll see metal teeth cast into the platform. This goes against the tree! There should be 2 (on for the top and one for the seat), Clearish, heavy plastic (nylon?)bark biting belts with teeth in them. They lock into the hollow sections of the stand with the swiveling (permanently attached) clips. They adjust to fit snugly around the tree.
Do not use this stand until someone explains it properly..go to the local Cabelas or where-ever and have someone help you!
On the seat back .. on mine there is a Nylon strap on the back,upright portion, of the back pad. It has a male end and a female end. You adjust the tension to the proper size tree..and then wrap the nylon strap around the tree and insert the male end to the female end.
Lone Wolf Users
good luck
