black plastic stock question/can you dye it black again

[stripercrazy]

the stock looks like someone cleaned the rifle like a madman the stock is stained with what ever solvent they used they must must have used 10x what they needed and left it on the stockuntill it discolored it.....I'm wondering if anyone soaked a black stock in black dye...I wonder of the die will stain/dye the solvent stain back to black...stock look good wet but when it drys it get whiteish where the solvent dripped out the breech aera and down the stock...thanks ed

[builder459]

I did a DIY camo paint job on mine, or you could spray it black again.Krylon and rustoleum both market camp black paint.

[freebirdfb]

I would second painting it. I was in my local Westlake the other day looking at paint for a stock job. Along with the regular paints, they also had a few cans of lightly textured outddor paints.

[sqezer]

after it's painted put a coat of clear spray enamal over it to seal the paint and keep it from chipping off.

[MountainDevil54]

i repainted my optima stock with satin black paint and then followed up with 4 coats of satin clear. Came out looking better than new!

[stripercrazy]

I put the stock in dye for a couple day each side it didn't work lol cost 5 bucks...was was talking to a auto body guy about the stuff they used on vinyle roofs/dash boards..hopeing its a dye not paint....trying not to coat the plastic with paint... I was wondering about cutting margic markers and rolling the stock lol

[Breechplug]

Why dont you just order a New Stock, they cant be that much.

[MountainDevil54]

just paint it! Its no biggy to use spray paint. Just prep the stock with an sos pad, clean the debris off, lightly primer it and then again, lightly paint it and slowly build the layers up. Finish off with a matte finish. You'd be surprised at how well they come out.

[Breechplug]

I also have Painted a few Stocks, I make My Own Stensils too, I can Camo a Stock to fit any Season.
Most Car and Truck Panels today are made of Plastic, they have some Good Paints and Clearcoats out there for that porpouse. I'd go New if you dont want to use any Paint, but take My Advice Skip the Majic Marker thought.

[a1smokepole]

what stock do you have and if you buy new I will buy the old one if a knight disc stock