Speer deep curls in .475 325gr

[mack166]

Has any body tried these thought about it cause the 300 gr.452 are hard to fine in stock

[Semisane]

I really don't think you could load a .475 bullet in any of your three guns Mack (unless one is a .54). You might look at some of the Speer .458 bullets made for the 45-70. They are excellent bullets and you can shoot them in a .50 with MMP orange sabots, and with regular 50/45 sabots in some guns, depending on how tight the bore is.

Just checked - Graf & Sons is showing the 300 grain Deep Curls in stock. The listing shows the wrong picture, but the bullet number (3974) is correct.
http://www.grafs.com/retail/catalog/...roductId/17309

[sabotloader]

mack166

Gamaliel has them also... check shipping price though...

http://www.gamaliel.com/45Caliber451...soft-point.asp

[ronlaughlin]

Originally Posted by Semisane

....................................Just checked - Graf & Sons is showing the 300 grain Deep Curls in stock. The listing shows the wrong picture, but the bullet number (3974) is correct.
http://www.grafs.com/retail/catalog/...roductId/17309

These are the very bullet i ordered last week, and received in just a couple of days, and they are the correct bullet with an incorrect picture.

Semi-..

That is quite slick you figured out this was the right bullet even how the picture was incorrect. Now, i am wondering if your wife is confusing you with your brother/alter-ego. Results of these question seem to indicate you might should be named more or all, instead of semi. This then leads one to wonder if perhaps you shouldn't have a name at all, because you seem to be just sane. What would you rather go by? More, All, Blank, Just, or what about Sane Sane?




.

[Semisane]

Can't change my name now Ron. The witness protection program rules are real strict about such things.

[josh...just josh]

Originally Posted by Semisane

I really don't think you could load a .475 bullet in any of your three guns Mack (unless one is a .54). You might look at some of the Speer .458 bullets made for the 45-70. They are excellent bullets and you can shoot them in a .50 with MMP orange sabots, and with regular 50/45 sabots in some guns, depending on how tight the bore is.

Harvester makes a .475x50 sabot