Wolf's final sight in

[MountainDevil54]

Got out this cool evening with the Wolf, set up my other shooting table earlier and figured it would be just right to get dialed in.

Took my 3 shots which were high, made adjustments down and fired 3 more. I ended up moving the sight half a click up and that would do it. I cleaned the gun, oiled up the firing pin assembly and shes good to go on Sept 10th if i have to use her.

100gr Blackhorn209
.500" 250gr Thors
CCI 209 Magnum primers

Shots that are on the left were the first shots on Cold bores. The next 2 shots that are touching or close to touching are on warm/hot barrels and no cool down time.



This table will work fine for the 100 yard range. You can see my bench table in the far back ground.


Had i done to 7 minute cool down between shots, no doubt i'd have them all touching!

[cayugad]

How large is that black circle you shoot at? I am guessing you wanted it a little high in case the shot was further then 100 yards?

[MountainDevil54]

It should be dead on @ 6 o'clock now. Its a 4" circle and i was up to high at first. I prefer to be dead on at 100 yards when using open sights.