Chiefs Pro Clean Retriever

Iowabucks44 · 02-23-2011, 10:15 AM

I came across this product from a Max Muzzleloader video and was wondering if anyone has used one?

By looking at the picture it looks like it cleans out the rifling grooves unlike a regular patch and cleaning jag. Suppossedly improving accuracy. Although i would think you would just be pushing the fouling back down toward the breech plug and not getting it all brought back out of the barrel.

Other then that, it sounds like it would work, i was just wondering if anyone here has used one and what their thoughts were on this product. The product is barrel specific so it obviously isn't a one size fits all.

Gotbuck · 02-23-2011, 05:08 PM

A while back a fella on here had one and said it did pretty good. You are correct about pushing the fowling down the bore but if your breechplug is removable then no worries. I would not use that on a traditional rifle that would bunch up a lot of that crap in the breach. Unless you shoot a lot of lead conicals I see no reason to get one if you shoot saboted bullets. My gun usually gets everything nice and clean within 5 patches and the grooves are nice and shiney.

Iowabucks44 · 02-23-2011, 07:06 PM

My barrel looks real shiney too being stainless, and the grooves look clean, but alot of people thought that my accuracy problem could be plastic fouling from the sabots, which is why i thought this tool might work.

I plan on shooting at least 100 rounds in a day here soon and i don't feel like taking the breech plug out every time i use it. So i may just pass on it unless i hear good results from others.

builder459 · 02-23-2011, 07:27 PM

Quote:

Originally Posted by Iowabucks44

My barrel looks real shiney too being stainless, and the grooves look clean, but alot of people thought that my accuracy problem could be plastic fouling from the sabots, which is why i thought this tool might work.

I plan on shooting at least 100 rounds in a day here soon and i don't feel like taking the breech plug out every time i use it. So i may just pass on it unless i hear good results from others.

I seriously doubt that your accuracy problem is due to plastic fouling.what rifle,powder, bullet/sabot combo are you using. Ray

Iowabucks44 · 02-24-2011, 08:52 AM

Quote:

Originally Posted by builder459

I seriously doubt that your accuracy problem is due to plastic fouling.what rifle,powder, bullet/sabot combo are you using. Ray

I shoot a Knight LK93 with a stainless barrel and 3X9X40 scope. Loads are 100gr of 777 and a 260gr Barnes Red Hot Bullet or Expander MZ.

7.62NATO · 02-24-2011, 09:07 AM

I'm sure it gets the grooves cleaner than a standard cleaning jag and patch, but I use the Otis system to give my muzzleloader (and all other guns) a thorough cleaning. You can make the patch impossibly tight, so you know that the grooves are getting cleaned well (and you can clean from breech to muzzle). What I don't like about this product is that it claims that it is NOT one-size fits all, yet it lists the #102 Retriever as being able to clean the Omega and a whole HOST of other .50 muzzleloaders. Point being that the Omega is known for its tighter bore.

I also do not like the USA&Jag spinning adapter as it is ripping off the SpinJag concept. I hope this company gets their asses handed to them in court.

sabotloader · 02-24-2011, 10:28 AM

Iowabucks44

I have not read all the posts in this thread... so if I walk something I am sorry - did not do it on purpose....

I do remember reading some where that you might have some concern about plastic fouling in the bore. With the older formulation of sabots, this is/was a possibilty. Looking down the bore and seeing how bright it might be is not an indication of a clean bore. There is probably fouling, especially plastic fouling caught on the leading edge of a land, powder fouling especially can easily be had with water and a bore mop as the powder is fouling is water soluble, while pastic residue is not. The newer sabots that are available today using a new formulation of polymere does not present the problem that the older formulation did.

The 'TOOL', I can not really speak for it or again it as I have never used one. I have seen them before and looked at the adds but realy never felt it was a advantageous to me.

If you really want to rid the bore of any fouling and especially plastic fouling then I would suggest it needs to be stripped back to bare metal. One method is using JB's bore paste it will do a very good job but it is possible to still leave some plastic fouling in the bore.

Here is a video explaining the JB method:

http://www.brownells.com/.aspx/lid=1...G_Bore_Pellets

If you really want to get everything out of the a ML bore I think the best method continues to be to flush the bore with clean boiling water and then while hot use a bronze brush to brush out the loosened materials.

If you do this and you have a blued barrel, dry the bore as quiclky as possible - I blow compressed air through and then dry patches. You still may get a bit of flash surface rust.

If you have a stainless bore you will not have to dry as fast and you probably will not experiance flash rust.

The boiling water expands the the metal in the bore flushes the pores of the bore, cause lead or copper fouling to flake and softens the plastic residue to the point it will not adhere to the metal.

On a gun that I shoot a lot, I will do this procedure a couple of times a year. Others may not get this treatment only o very few occasions. All that I am having accuracy issues with will get this treatment after I have eliminated stock to brrel issues and sight/scope issues.

Just another thought if you are using a bore oil with teflon in it, or a petroleum based bore oil, you might consider switching to a synthetic oil.

Hope some of this might help...

bronko22000 · 02-24-2011, 02:12 PM

I wouldn't really want to use this product. Any stubborn fouling should come out with quality nylon brush and the correct solvent. Followed by a good tight fitting patch.

MountainDevil54 · 02-24-2011, 02:19 PM

wouldnt work in my barrel due to the rifling design. And if it did fit, i still wouldnt use it

Iowabucks44 · 02-25-2011, 07:33 AM

Quote:

Originally Posted by sabotloader

All that I am having accuracy issues with will get this treatment after I have eliminated stock to brrel issues and sight/scope issues.

Can i get a little info on making sure i don't have any stock to barrel issues? I have seen info on tv about how a free floating barrel helps and heard of different procedures of seating the barrel. I will be putting a new stock on my gun very soon (broke the original one), and don't want to have issues there.